Ferguson FTV32DFW6 Manual - page 20
- 20 -
Selecting Language
Menu language can be selected by pressing or
button on
Language
item.
EXT-2 Output
Using or
button select EXT-2 Output.
Press or button to select the source which will
be given. From EXT-2 output, either TV, EXT1,
DTV
or
FAV can be selected.
Blue Background During No-Signal
In case, no valid signal is detected Blue Background is
activated. During search process Blue Background is
not active. But instead of it there is another feature given;
the semi-transparent menu background is made blue.
Blue Background
feature can be switched on or off by
pressing or button.
To Store Settings
In
Feature
menu all settings are stored automatically.
Installation Menu
To enter the
Installation
menu directly, press the
BLUE
button, or
Press
MENU
button, now you are in
MENU
. In the
MENU
, select
INSTALLATION
using or
button.
Then enter the
Installation menu by pressing or
button.
0(18
6281'
3,&785(
)($785(
,167$//$7,21
352*5$00(
Tuning Mode
Selecting Channel
Press or
button to select
Tuning Mode
. By
pressing or button , you can select the mode in
which you want the search to be made,
Channel
mode or
Frequency
mode.
When you select
Channel
the display of the Installa-
tion Menu will be as below :
352*5$00(
%$1'
&+$11(/
'(&2'(5
),1(781,1*
6($5&+
781,1*02'(
6725(
&
&+$11(/
Selecting Programme
To select programme number, you can use or but-
ton or Digit Buttons.
Selecting Band
BAND, can be selected either C or S by pressing
or button.
Selecting Channel
CHANNEL
can be changed by or button or Digit
Buttons.
For band C,
01 - 17, 21 - 73
For band S,
01 - 41
Selecting Decoder
You can use this mode to connect any decoder to your
TV.
Press the or button to turn it ON or OFF.
When you switch Decoder OFF, EXT2 output will be
muted. If it is switched ON the EXT-2 output will be the
selected video source. Any decoder can be connected
to EXT2 to unscramble required video signal.
Decoder setting should be stored separately for each
programme.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjust-
ment (after coarse adjustment), if you are not happy
with the image on the screen.
Use or button on
FINE TUNING
item, until getting
the best image on the screen.
In Channel option, normally the Fine Tuning cursor is
placed at the middle on the slider, and this is indicated
with two reciprocal arrows.
Selecting Search
Using or
button select Search item.
Press or button in order to start channel search.
SEARCHING...
is displayed during the search process.
Searching is stopped as soon as a station is found or
, , , buttons are pressed.
To Store Settings
Press or button on
STORE
option to store Instal-
lation menu settings.
Selecting Frequency
When you select Tuning Mode as
Frequency
, the
display of the Installation menu will be as below :
50070772-3274W-2147UK-ENG-VIRTUAL DOLBY-RF-TEK LED (BLUE)-AK49 IDTV.p65
21.10.2005, 14:35
20