Ferguson FTV32DFW6 Manual - page 8
- 8 -
Basic Operations
You can operate your TV using both the remote con-
trol handset and onset buttons.
Operating with the buttons on the TV
Volume setting and programme selection can be made
using the buttons on the front of the TV.
Volume Setting
Press
button to decrease volume or
button to increase volume, so a volume level
scale (slider) will be displayed in the lower middle side
of the screen.
Programme Selecting
Press
P/CH+
button to select the next programme
or
-P/CH
button to select the previous programme.
Entering MENU
Press
MENU
button to enter the
MENU
. In the
MENU
select sub-menu using
-P/CH
or
P/CH+
button and
enter the sub-menu using
or
but-
ton. To learn the usage of the menus, refer to the Menu
System section.
Operating with Remote Control
The remote control handset of your TV is designed to
control all the functions of the model you selected. The
functions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in Menu
System section.
Volume Setting
Press
V+
button to increase volume. Press
V
but-
ton to decrease volume. A volume level scale (slider)
will be displayed on the screen.
Programme Selecting (Previous or next
programme)
Press
P-
button to select the previous programme.
Press
P+
button to select the next programme.
Programme Selecting
Press digit buttons on the remote control handset to
select programmes between 0 and 9. TV will switch to
the selected programme. To select programmes between
10 - 99, you must use the double digit button
.
is displayed on the upper left side of the screen.
After this, you can enter a programme by pressing two
digit keys consecutively. If you have not pressed a key
within 3 seconds, this function will be ignored and the
display will be erased. Likewise, you must enter the
second digit within 3 seconds of entering the first digit.
Programme Swapping
Press "
P
" (programme swap) button to select the
last selected programme. This button provides swap-
ping between the last two programmes. For example,
select programme 8, then select programme 2. Now, if
you press "
P
" button, programme 8 will be selected.
If you press the same button again, programme 2 will
be selected and so on.
Everyday Operation
Pressing the
TV/DTV
button at any time while watch-
ing television programmes will switch the TV set be-
tween displaying the digital terrestrial television broad-
casting and its normal analogue broadcasting.
Information Banner
Whenever you change channel, using the
P+
/
P-
button or the digit buttons, TV displays the channel pic-
ture along with an information banner at the bottom of
the screen. This will remain on the screen for approxi-
mately three seconds. The information banner can also
be displayed at any time while watching TV by pressing
the
INFO
button on the remote control.
1RZ
1H[W$FH/LJKWLQJ
%%&21(
6LJQDO/HYHO
The information banner gives a number of facts on the
channel selected and the programmes on it. The name
of the channel is displayed, along with its channel list
number and an indication of the strength of the signal
received on this tuning channel.
Hint
Not all channels broadcast the programme data. If
the name and times of the programme is not avail-
able then No Information Available is displayed
in the information banner.
Icons are also displayed in the information banner and
if this channel is a favourite channel:
Favourite channel icon
.
If the selected channel is locked, you must enter the
correct four digit code to view the channel.
(QWHU/RFN.H\
50070772-3274W-2147UK-ENG-VIRTUAL DOLBY-RF-TEK LED (BLUE)-AK49 IDTV.p65
21.10.2005, 14:35
8