Ferimex outdoor multi-router 1 outdoor multi-router 3-2 outdoor multi-router 1-1 outdoor multi-router 1-1 lite installation manual outdoor multi-router 3-2 outdoor multi-router 1-1 and 1-1 lite.
Ferimex outdoor multi-router 2 table of contents characteristics ……………………………………………………………………………..….3 package contents .………………………………………………………………….………..3 hardware description ………………………………………………………………………..4 hardware installation ………………………………………………….…………………......7 accessing the configuration ………………………………...
Ferimex outdoor multi-router 3 characteristics outdoor multi-router product line are special high-performance outdoor routers. They are suitable for creating access points or backbone connections for wireless networks in unlicensed bands 2,4 ghz and 5~6 ghz. Outdoor multi-router 3-2 has three 10/100...
Ferimex outdoor multi-router 4 package does not contain ethernet cables. You should prepare ethernet cables by yourself in the lengths you need. Ferimex can sell you ethernet cables separately. Hardware description a) outdoor multi-router 3-2 1. Eth 1 + poe in 2. Eth 2 3. Eth 3 4. Wlan 1 5. Wlan 2 6...
Ferimex outdoor multi-router 5 b) outdoor multi-router 1-1 1. Eth 1 + poe in 4. Wlan 1 6. Poe out (to outdoor device) 7. Power input 8. Lan in 9. Mounting bracket (numbers 2,3 and 5 are unused).
Ferimex outdoor multi-router 6 c) outdoor multi-router 1-1 lite 1. Eth 1 + poe in 4. Wlan 1 6. Poe out (to outdoor device) 7. Power input dc jack 8. Lan in 9. Mounting bracket (numbers 2,3 and 5 are unused).
Ferimex outdoor multi-router 7 hardware installation 1. Assemble the mounting bracket (9) and connect it to the back side of plastic housing of the outdoor unit using 4 screws. The holes for screws are on both right and left sides, so you can choose where you connect the holder. 2. Mount the outdoor...
Ferimex outdoor multi-router 8 caution: always install the outdoor unit with the arrow mark pointing up. At the bottom of device there is small aperture. Always keep this aperture facing down so condensate moisture can leak out from the device. Otherwise the water may leak into the device during the...
Ferimex outdoor multi-router 9 searching mikrotik devices in your network to assign the ip address to the device in the menu click “ip -> addresses”. Then click “+”, fill ip address to the “address” field and select the interface to which the address should be assigned. Then click ok..
Ferimex outdoor multi-router 10 in the same way you can assign ip addresses to other interfaces. See attached reference manual for more configuration advice. 2. Command line interface (cli) – the build-in cli can be accessed using telnet or ssh over ip address or using mac telnet over mac address. I...
Ferimex outdoor multi-router 11 technical parameters a) outdoor multi-router 3-2 manufacturer ferimex it purpose multi-function router software mikrotik routeros™ processor 680mhz mips ethernet lan 3x 10/100base-t wireless port 2x 2,4 ghz/5ghz 802.11a+b+g chipset atheros ar5414 output power/ receive...
Ferimex outdoor multi-router 12 b) outdoor multi-router 1-1 manufacturer ferimex it purpose multi-function router software mikrotik routeros™ processor 300mhz mips ethernet lan 0x 10/100base-t wireless port 1x 2,4 ghz/5ghz 802.11a+b+g chipset atheros ar5414 output power/ receive sensitivity ieee 802...
Ferimex outdoor multi-router 13 c) outdoor multi-router 1-1 lite manufacturer ferimex it purpose multi-function router software mikrotik routeros™ processor 300mhz mips ethernet lan 0x 10/100base-t wireless port 1x 2,4 ghz/5ghz 802.11a+b+g chipset atheros ar5414 output power/ receive sensitivity iee...
