Ferm bv • p.O. Box 134 • 8280 ac genemuiden • nl • www.Ferm.Com 0210/24 ferm band saw flz-275 user’s manual art.Nr. 730762 screwfix art.Nr. 18772 uk subject to change document ref: flz-275/18772/pmr28/issue 1/april 02 copyright © these instructions are the sole property of ferm-omega tools and may n...
Ferm band saw flz-275 users manual technical specifications product information 1. Base 2. On/off switch 3. Saw blade 4. Saw blade guard 5. Blade guide adjusting knob 6. Frame 7. Blade tension knob 8. Adjustment knob 9. Sawdust outlet 10. Blade guides 11. Table 12. Table tilt groove 13. Graduated sc...
10 ferm spare parts list aaa-000 ref nr description ferm nr - capacitor (8 µf) 311048 13 spare saw blade (1.425 x 6 x 0,3 mm) 330795 16 rubber band 403461 19 pressed handle (complete, part 19, 20, 21, 22, 23, 24 + 25) 403463 36 magnetic switch 403469 50 motor 403471 79 saw guide (complete, part 79, ...
Guarantee the guarantee conditions can be found on the separately enclosed guarantee card. We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents en61029-1, pren61029-2-5 en55014-1, en61000-3-2, en61000-3-3, en55014-2 in acc...
Fitting/removing and tensioning saw blades make sure the saw is switched off and unplugged from mains. Refer to parts illustration and figs 5/8 below. When changing blades make sure that the blade slot, chamber, wheels etc are free from sawdust and debris. • open the band saw cover by unscrewing bot...
Using the saw before operating • check the voltage on the saw corresponds with your power supply voltage and that the plug and lead are in good condition. • check you have the correct type of saw blade for the machine and that it is mounted correctly. Do not use parts other than supplied with the ma...
