1. DL manuals
  2. Ferm
  3. Drill
  4. FTB-13
  5. User Manual

Ferm FTB-13 User Manual

Other manuals for FTB-13: User Manual

Summary of FTB-13

  • Page 1

    Ferm bv • p.O. Box 134 • 8280 ac genemuiden • nl • www.Ferm.Com 0210/25 ferm table drilling machine ftb-13 user’s manual art.Nr. 733500 screwfix art.Nr. 19847 uk subject to change document ref: ftb-13/19847/pmr24/issue 1/april 02 copyright © these instructions are the sole property of ferm-omega too...

  • Page 2

    Ferm table drilling machine ftb-13 users manual technical specifications product information 1. On/off switch 2. Drill dept gauge 3. Protection guard 4. Motor 5. Drill dept lever 6. Table adjustment check first whether or not the delivery has been dama- ged by transport and/or whether all the parts ...

  • Page 3

    6 ferm spare parts list ftb-13 ref nr description ferm nr 27 motor 311053 37 magnetic switch 311051 50 cover for spring 311059 51 spring 311058 56 chuck guard 311055 58 v-belt 800157 10 chuck 311054 - chuck key 311057 - condenser 311056 operational safety concentrate do not allow routine, which occu...

  • Page 4

    Ferm 5 before using the table drill ensure the drill is unplugged from mains and the drill is switched off. Refer to illustration below. • the drill should be mounted on a stable surface and secured with suitable bolts/screws (not supplied) through the two holes in the centre of the footplate (13). ...

  • Page 5

    Checking the v-belt tension ensure the drill is unplugged from mains and the drill is switched off refer to illustration below • open the pulley cover, loosen thumbscrew (18) • move the motor plate (17) backwards /forwards to adjust the v-belt tension. The correct tension is +/- 1 cm in middle of be...

  • Page 6

    Electrical information this product is complete with a pre-wired mains plug. If the plug needs replacing follow these instructions. Wire correctly the mains wires in this machine are coloured in the follo- wing way: blue • neutral (n) brown • live (l) earth • green/yellow (e) securing wires secure w...