Fermax VDS Smile Monitor User Manual - Smile Vds
Page 38
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
Manual Monitor Activation (Auto-Start)
With the monitor on standby, press and hold the
wildcard
for 1 second to switch the monitor on
manually. to sequentially select between the main
camera and the secondary camera (where one exists),
press and hold the wildcard button
for 2 seconds.
To activate the audio and speak to the visitor or open
the door, follow the steps above.
If communication is not established with the entry pa-
nel, the monitor will automatically go off after 30
seconds.
Notes:
- The wirldcard button
by default is for
autostart, (even though you can program it
with another function, ask your installer.
- Auto-start can be performed:
o
Wildcard button
or
o
By pressing the shortcut button or
o
By selecting the icon of the auto-start
function on the menu.
1
Via the MENU.
(Pressing "Menu" for 3 seconds
).
With shortcut buttons.
(Short press "Menu"
).
Note: When communicating or only with video, pressing the Menu button twice displays
the shortcut buttons.