Ferroli Optimax 25C- Modena HE Replacement Manual - page 5
BOILER REPLACEMENT: OPTIMAX 25C TO MODENA 32C HE
Boiler Pack Contents
INSTALLING THE NEW MODENA C HE
Modena 32C HE Dimensions
1. Check the existing flue terminal position
with regard to possible nuisance “pluming”.
2. Unpack the boiler and check the contents
are complete and undamaged (see opposite)
Please note:
The new flue kit is sold separately
3. Align the fixing template on the wall with
the existing flue hole, ensuring it is level
both horizontally and vertically. Check for
required minimum clearances then mark the
most suitable fixing points for the hanging
bracket. It is advisable to mark the position
of the gas, water and heating pipes at this
point (Fig.5)
4. Drill the wall and fix the hanging bracket
using the wall plugs and fixings provided.
Make sure the bracket is level before
tightening the fixing screws
1 x Modena C HE Boiler
1 x Installation Instructions
1 x Hanging Bracket
1 x Filling Loop
1 x Valve Pack
1 x Condensate Bowl/Hose
1 x Paper Template
Fig.5