- DL manuals
- Fervi
- Saw
- 0500
- Translation Of The Original Instructions
Fervi 0500 Translation Of The Original Instructions
Summary of 0500
Page 1
Operation and maintenance manual electronic cutting band saw for bench art. 0500 translation of the original instructions fervi.Com.
Page 2: Preface
Machines and accessories pagina 2 di 32 preface please ensure you have read this manual before any operation translation of the original instructions before undertaking any operation on the machine, it is compulsory to have read this instruction manual. The guarantee that the machine will function a...
Page 3: Contents
Machines and accessories pagina 3 di 32 contents 1 introduction ........................................................................................ 5 1.1 preface..........................................................................................................................6 2 general ...
Page 4: Fervi.Com
Machines and accessories pagina 4 di 32 10.1.1 at the end of each machining............................................................................. 26 10.1.2 periodically ........................................................................................................ 26 10.2 changing th...
Page 5: Introduction
Machines and accessories pagina 5 di 32 1 introduction this manual is delivered with the machine, and it must be regarded as an inseparable part of it. The manufacturer holds all ownership to material and intellectual property of this manual; any disclosure or copying, even partial, of this publicat...
Page 6: Pay Attention
Machines and accessories pagina 6 di 32 g raphic representation of safety , operational and risk warnings the following boxes are designed to attract the attention of the reader / user for the proper and safe use of the machine: pay attention this highlights behavioural rules to prevent damage to th...
Page 7: General Safety Warnings
Machines and accessories pagina 7 di 32 2 general safety warnings 2.1 general safety rules for machine tools risks related to using the machine do not underestimate the risks related to the use of the machine and stay focused on the work you are carrying out. Risks related to using the machine despi...
Page 8: Fervi.Com
Machines and accessories pagina 8 di 32 6. Keep the workplace tidy and free from hindrances; disorder causes accidents. 7. Make sure that the work environment is forbidden to children, non-employees and animals. 8. Do not perform tasks on the machine other than those for which it was designed. Only ...
Page 9: Tools
Machines and accessories pagina 9 di 32 2.2 safety regulations regarding the electric system of machine- tools risks associated with using the machine 1. Do not modify the electrical system in any way. Any attempt in this regard may jeopardize the operation of electrical devices, causing malfunction...
Page 10: 3 Technical Specifications
Machines and accessories pagina 10 di 32 3 technical specifications model art. 0500 height (mm) 580 width (including the reference bar) (mm) 620 depth (mm) 530 net weight (kg) 20 rated voltage (v) 230 power (w) 1800 frequency (80 - 16000 hz) 50 current (a) 5 blade size (mm) 1140 x 13 x 0.65 blade sp...
Page 11: Fervi.Com
Machines and accessories pagina 11 di 32 4 description of the machine the b ench band saw (art. 0500) must only be used for cutting metal materials with the characteristics indicated below and within the limits recommended by the manufacturer and the safety and health norms. The machine is designed ...
Page 12: Fervi.Com
Machines and accessories pagina 12 di 32 4.1 main parts of the machine figure 1 - overview of the machine 1 base 9 belt speed adjustment knob 2 safety bracket for transport 10 blade guide locking lever 3 clamp activation lever 11 blade guide 4 clamp, piece-holder 12 blade (belt) 5 machine body 13 el...
Page 13: 4.2 Identification Label
Machines and accessories pagina 13 di 32 4.2 identification label the identification plate shown below is attached to the machine: figure 2 – identification plate 4.3 pittogrammi the machine has the following pictograms: figure 3 – prohibition pictograms on the machine. It is strictly forbidden to: ...
Page 14: Attenzione
Machines and accessories pagina 14 di 32 plate in italian plate in english e’ assolutamente vietato: lubrificare la lama: prima, durante e dopo l’uso; operare senza il guidalama installato e regolarmente posizionato; operare senza la protezione lama posteriore; bloccare con le mani il pezzo da tagli...
Page 15: Fervi.Com
Machines and accessories pagina 15 di 32 figure 4 – warning pictograms on the machine. Fervi.Com.
Page 16: 5.1 Start Button
Machines and accessories pagina 16 di 32 5 description of the controls 5.1 start button found on the control handle of the band saw (see figure 5 and ref. 7 in figure 1 ) is the start button of the blade, consisting of a sustained action safety button. This switch is equipped with a sliding safety c...
Page 17: Fervi.Com
Machines and accessories pagina 17 di 32 5.2 cutting speed adjustment knob positioned at the base of the control handle of the band saw (see figure 6 and ref. 9 in figure 1 ) is the cutting speed adjustment knob. Figure 6 - cutting speed knob to adjust the cutting speed of the blade, turn the adjust...
Page 18: Machine Safety Devices
Machines and accessories pagina 18 di 32 6 machine safety devices 6.1 electrical safety devices in the event of malfunction or breakdown, the b ench band saw is equipped with a power cord and plug with a earthing lead that provides a path of minimal resistance to the electric current; thus it reduce...
Page 19: Use Of Ppe
Machines and accessories pagina 19 di 32 use of ppe in any case, always use appropriate personal protective equipment such as: gloves; goggles or face shields; overalls or aprons; safety shoes. Figure 7 - personal protective equipment. 6.3 improper use and contraindications the following act...
Page 20: 7 Transport And Lifting
Machines and accessories pagina 20 di 32 7 transport and lifting the b ench band saw weighs 20 kg, so it can be lifted and moved by hand by a single operator. To do so, follow the instructions below: disconnect the power plug from the outlet and pick up the cable, making sure that will not be dama...
Page 21: 8.1 Unpacking Instructions
Machines and accessories pagina 21 di 32 8 installation and commissioning 8.1 unpacking instructions the b ench band saw is supplied ready for use, supplied with a band blade measuring 1140 mm x 13 mm x 0.65 mm and packed in a cardboard box. Before disposing of packaging, check that no parts of the ...
Page 22: Collision Of Flying Parts
Machines and accessories pagina 22 di 32 8.3 connection of the electric power supply plug and start test 1. Insert the power supply plug into a grounded double pole socket (10/16 a, 230 v). 2. Start the machine by pressing the start button on the handle (see figure 5 ) and make sure that the directi...
Page 23: 9 Operation
Machines and accessories pagina 23 di 32 9 operation 9.1 instructions for use operating the machine the bench band saw (art. 0500) should only be used with certain metallic materials (section bars, stainless steel, copper, aluminium and its alloys). do not cut "hardened or case-hardened" steel p...
Page 24: Fervi.Com
Machines and accessories pagina 24 di 32 4. After selecting the desired angle, tighten the angle locking nut (ref. 16 figura 11 ). 5. Fit the reference rod into the hole (ref.17 in figure 12 ) and secure it with the headless screw (ref.18 in figure 12 ). 6. Loosen the knob (ref.19 in figure 12 ) and...
Page 25: Cutting Hazard
Machines and accessories pagina 25 di 32 to adjust the cutting speed of the blade, turn the adjustment knob in the following way: rotate clockwise to decrease the cutting speed; rotate anti-clockwise to increase the cutting speed. The cutting speed must be set according to the material to be cut...
Page 26: 10 Maintenance
Machines and accessories pagina 26 di 32 10 maintenance any maintenance, except for that specifically listed in this manual should be performed by qualified staff authorized by the manufacturer. 10.1routine maintenance 10.1.1 at the end of each machining electric shock before maintenance or checks, ...
Page 27: Electric Shock
Machines and accessories pagina 27 di 32 10.2changing the bandsaw blade electric shock before replacing the blade, turn off the machine and always remove the plug from the power outlet. This is so that there is no risk of electric shock or undesired activation of the machine. Wear ppe always wear su...
Page 28: Fervi.Com
Machines and accessories pagina 28 di 32 figure 17 - changing the bandsaw blade. 2. Using a screwdriver, remove the fixing screws of the rear protection guard (see figure 16 and ref.28 in figure 17 /c) and remove it. 3. Turn the blade tensioner lever (see ref.29 in figure 16 and figure 17 /d) to the...
Page 29: 11 Electrical Circuit
Machines and accessories pagina 29 di 32 11 electrical circuit figure 18 - diagram of the electrical circuit 12 spare parts always clearly indicate: the symbol and the serial number of the machine; the code number of the parts; number of parts; exact address of your company. Genuine parts th...
Page 30: Fervi.Com
Machines and accessories pagina 30 di 32 fervi.Com.
Page 31: Fervi.Com
Machines and accessories pagina 31 di 32 no. Descr. Code description no. Descr. 05000/01 plain bearing 0500/28 rear jaws 0500/55 switch 05000/02 nylon washer 0500/29 plain bearing 0500/56 rear handle 05000/03 slide 0500/30 sliding jaws 0500/57 secondary gear 05000/04 special bushing 0500/31 base pla...
Page 32
Machines and accessories pagina 32 di 32 13 troubleshooting problem probable cause solution noisy operation. A) damaged bearings. B) bearings not lubricated. C) blade friction. D) blade loose. A) contact technical support. B) lubricate. C) remove / replace the blade and check sliding. D) turn the bl...