Summary of 339
Page 1
Operation and maintenance manual reversible air drill art. 0339 original instructions fervi.Com.
Page 2: Foreword
Hardware page 2 of 14 foreword read this manual before operating any machinery original instructions before starting any operation it is compulsory to read this instruction manual. The guarantee of smooth operation and full performance of the machine is highly dependent on the application of all the...
Page 3: Contents
Hardware page 3 of 14 contents 1 general safety instructions............................................................. 4 1.1 risks associated with the work area ............................................................................4 1.2 risks associated with the presence of rotating and/or ...
Page 4: Parts
Hardware page 4 of 14 1 general safety instructions 1. During use, maintain control of the tool. 2. The operators represent the most important aspect of safety. To best protect against the risk of injury, work cautiously and carefully. 3. The pneumatic tool should not be used and repaired by someone...
Page 5: 1.4 Technical Support
Hardware page 5 of 14 1.3 personal protective equipment when using the pneumatic tool, always wear the following: safety shoes work gloves hearing protection (cap, earplugs, etc.) protective goggles figure 1 - personal protective equipment. 1.4 technical support for any problem or request for clarif...
Page 6
Hardware page 6 of 14 2 description of the drill and intended use the reversible air drill (art. 0339) is a portable pneumatic tool, to be used for drilling holes in various kinds of material such as wood, metal, plastic, etc. The drill is made up of the following parts (see figure 1): 1) the typica...
Page 7
Hardware page 7 of 14 2.1 technical specifications reference value spindle (mm) 10 bit diameter (mm) 1.5 ÷ 10 rotation speed (rpm) 1800 operating pressure (bar/psi) 6 / 90 air consumption (cfm / l/min.) 5 / 150 empty weight (kg) 1.1 sound pressure level emitted into the environment (db (a)) 82.8 fer...
Page 8
Hardware page 8 of 14 3 improper use and contraindications it is strictly forbidden to: allow the tool to be used by untrained personnel and those who have not read the instruction manual; use the tool for different purposes and uses other than those for which it was designed, i.E. Drilling; u...
Page 9: 4 Commissioning
Hardware page 9 of 14 4 commissioning 1. Remove the air inlet cap, then screw the nozzle into hole: 1/4" npt male quick-release coupling 2. Put a few drops of lubricating oil (without resin acid) in the air inlet nozzle. 3. Check the flexible air supply hose. If it is damaged, broken, torn or deform...
Page 10: 5 How To Use
Hardware page 10 of 14 5 how to use 5.1 mounting the cutting bits crushing and cutting before mounting and/or removing the cutting bits, always disconnect the air supply hose. Protective gloves before attaching and/or removing the cutting bits, wear suitable protective gloves. 1. Insert a cutting bi...
Page 11: 5.2 Power On / Off
Hardware page 11 of 14 5.2 power on / off (personal protective equipment) ppe before using the drill, wear suitable work clothing, gloves, shoes and protective goggles. Also wear protective devices for the ears (hearing protectors), such as earmuffs, earplugs, etc.. Workspace be familiar with the wo...
Page 12
Hardware page 12 of 14 6 maintenance and cleaning the purpose of this section is to provide all the information on maintenance procedures and their frequency, as required by the drill, art. 0339. Intervention frequency daily weekly 1. General visual inspection x 2. General cleaning x 3. Clean the ai...
Page 13
Hardware page 13 of 14 7 bill of materials and spare parts fervi.Com.
Page 14
Hardware page 14 of 14 ref. Description ref. Description 0339/01 main body 0339/18 inversion plate 0339/02 o-ring 0339/19 fins 0339/03 o-ring 0339/20 rotor 0339/04 valve rod 0339/21 cylinder 0339/05 o-ring 0339/22 pin 0339/06 bearing 0339/23 front ring 0339/07 o-ring 0339/24 washer 0339/08 inversion...