- DL manuals
- Fervi
- Grinder
- 383
- Original Instructions Manual
Fervi 383 Original Instructions Manual
Summary of 383
Page 1
User and maintenance manual bench grinding machine with sander art. 0383 original instructions fervi.Com.
Page 2: Preface
Machines and accessories page 2 of 29 preface read this manual before operating any machinery original instructions reading this instruction manual is required before operating any of the machinery. The guarantee that the machine will function and perform properly is strictly dependent upon the appl...
Page 3: Contents
Machines and accessories page 3 of 29 contents 1 introduction ........................................................................................ 4 1.1 p reface .......................................................................................................................5 2 safety warn...
Page 4: 1 Introduction
Machines and accessories page 4 of 29 1 introduction the purpose of this manual is to provide the knowledge necessary for the use and maintenance of the bench grinding machine in question, and create a sense of responsibility and an understanding of the capabilities and limitations of the means entr...
Page 5: 1.1 Preface
Machines and accessories page 5 of 29 1.1 preface for safe and easy operation of the grinder, this manual must be read carefully in order to acquire the necessary knowledge. In other words, durability and performance are strictly dependent on how it is used. Even experienced bench grinding machine o...
Page 6: 2 Safety Warnings
Machines and accessories page 6 of 29 2 safety warnings 2.1 general safety rules for machine equipment risks associated with using the machine do not underestimate the risks associated with using the machine and concentrate on the work in progress. Risks associated with using the machine despite the...
Page 7: Fervi.Com
Machines and accessories page 7 of 29 13.Wear appropriate clothing. Loose clothing, dangling jewellery, long hair, etc.., can get caught in the moving parts, causing irreparable injury. 14.Do not pick up moving equipment (wheels, brushes, etc.) do not lift the machine by the equipment parts. 15.To s...
Page 8: 2.3 Technical Support
Machines and accessories page 8 of 29 2.2 safety regulations for electrical machine equipment changes in the electrical system do not modify the electrical system in any way. Any attempt in this regard may jeopardize the operation of electrical devices, thus causing malfunction or accident. work...
Page 9: 3 Technical Specifications
Machines and accessories page 9 of 29 3 technical specifications model art. 0383 p la te d a ta weight (kg) 16 voltage (v) 230 power (w) 350 frequency (80 - 16000 hz) 50 1 st t o o l type of tool dry grinding wheel size (mm) 150 x 20 x 16 speed (r/min) 2950 2 n d t o o l type of tool belt sander siz...
Page 10: 4 Installing The Machine
Machines and accessories page 10 of 29 4 installing the machine to install the bench grinding machine, proceed as follows: clean the machine before starting assembly, clean the protective product from the machine's components. 4.1 positioning and fixing on the bench loss of stability mount the bench...
Page 11: Fervi.Com
Machines and accessories page 11 of 29 4.2 installation of screens and clamping brackets 1. Mount the transparent protective screen of the dry grinding wheel using the fixing screws provided (see figure 2 ). Place the protective screen so that it does not touch the wheel and there is a maximum gap (...
Page 12: Impact Of Thrown Parts
Machines and accessories page 12 of 29 4.3 connecting the power plug and start-up test 1. Insert the power plug into a power outlet with a grounding wire. 2. Start the machine by pressing the green switch i (see figure 7) and make sure that the rotating direction of the equipment is consistent with ...
Page 13: Fervi.Com
Machines and accessories page 13 of 29 5 description of the machine figure 4 - main parts 1 machine body / motor; 2 start and stop buttons; 3 dry grinding wheel; 4 dry grinding wheel protective screen; 5 protective wheel casing; 6 bracket for supporting pieces; 7 belt sander; 8 belt sander casing. 1...
Page 14: 5.1 Nameplate
Machines and accessories page 14 of 29 5.1 nameplate the following nameplate is attached to the machine: figure 5 – nameplate fervi.Com.
Page 15: 5.2 Pictograms
Machines and accessories page 15 of 29 5.2 pictograms the machine has the following warning and attention pictograms ( figure 6 ): figure 6 – caution and warning pictograms. Fervi.Com.
Page 16: Attenzione
Machines and accessories page 16 of 29 description plate in italian plate in english non rimuovere i dispositivi di sicurezza È severamente vietata la rimozione e la omissione dolora d.Lgs. 81/08 do not remove safety devices removal is strictly prohibited due to risk of harm legislative decree 81/08...
Page 17: 6 Control Switches
Machines and accessories page 17 of 29 6 control switches they are located on the base of the machine body. They are used to turn the bench grinding machine on and off. 6.1 on switch (start) the green button (i), is used for starting (turning on) the bench grinding machine (figure 7). With this butt...
Page 18: 7 Operation
Machines and accessories page 18 of 29 7 operation 7.1 instructions for use bench grinding machines are very easy to use. The dry grinding wheel is used for grinding, sanding and/or smoothing solid and massive material (especially metal and metal alloys) by abrasion. The belt grinding wheel is used ...
Page 19: 7.2 Using The Machine
Machines and accessories page 19 of 29 7.2 using the machine press the green start button (start, see 1. Figure 9 ) figure 9 – starting the grinding wheel. 2. Place the piece to be ground on the support bracket and push it towards the grinding wheel without pressing excessively; 3. To avoid overheat...
Page 20: 8 Machine Safety
Machines and accessories page 20 of 29 8 machine safety 8.1 electrical safety the control device inserted in the electrical circuit of the bench grinding machine is a magnetic switch with two buttons (see section 6 of this manual). This prevents the danger of unwanted and/or accidental starts of the...
Page 21: Use Of Ppe
Machines and accessories page 21 of 29 8.2 "mechanical" safety devices p rotective casing and transparent screens this prevents the hot splinters, dust or wheel fragments that eventually get separated from being thrown into the operator's face. Checking the safety devices each time the grinding wh...
Page 22: 9 Maintenance
Machines and accessories page 22 of 29 9 maintenance 9.1 routine maintenance electric shock before maintenance or checks, turn off the machine and always unplug the plug from the power outlet. This is so that there is no risk of electric shock. Regularly clean and take care of the machine to guarant...
Page 23: 9.2 Replacing Tools
Machines and accessories page 23 of 29 9.2 replacing tools electric shock before replacing tools, turn off the machine and always unplug the plug from the power outlet. This is so that there is no risk of electric shock. Characteristics of the wheels do not use grinding wheels with a cavity. onl...
Page 24: Fervi.Com
Machines and accessories page 24 of 29 9.2.1 dry grinding wheel 1. Unscrew the three fastening screws and remove the protective casing. 2. For this purpose use a screwdriver. Figure 12 – protective casing. 3. Unscrew the fastening nut (ref. 17 in figure 13) using a spanner for hexagonal nuts, turnin...
Page 25: 10 Fault Finding
Machines and accessories page 25 of 29 10 fault finding problem probable cause solution noisy operation. A) damaged bearings. B) bearings not lubricated. C) rubbing of a tool. D) loose tool. A) contact the service department. B) lubricate. C) remove / replace the tools and check they are balanced. D...
Page 26: Respect The Environment!
Machines and accessories page 26 of 29 11 disposal of parts and materials if the machine is to be scrapped, its parts must be disposed of separately. Respect the environment! Contact a specialist centre for the collection of metallic materials. The structure of the grinding wheels is made of steel, ...
Page 27: 12 Electrical Circuit
Machines and accessories page 27 of 29 12 electrical circuit figure 14 – wiring diagram. Fervi.Com.
Page 28: 12.1Parts Of The Machine
Machines and accessories page 28 of 29 12.1parts of the machine figure 15 – set of parts. Fervi.Com.
Page 29: Fervi.Com
Machines and accessories page 29 of 29 code description code description 0383/01 screw 0383/43 switch 0383/02 screw 0383/44 condenser clip 0383/03 eye protection support 0383/45 washer 0383/04 flat washer 0383/46 screw 0383/05 grinding wheel washer 0383/47 support base 0383/06 nut 0383/48 washer 038...