Fervi 418 Operation And Maintenance Manual - Fervi.Com
HARDWARE
Page 6 of 13
2 DESCRIPTION OF THE DRILL AND INTENDED USE
The Air drill is a portable pneumatic tool, to be used for drilling holes in various kinds of
material such as wood, metal, plastic, etc.
The drill is made up of the following parts (see Figure 1):
1
"Gun" shaped body, which contains the vane rotor and the other moving parts
connected to the spindle shaft;
2
Spindle for mounting the drill bits;
3
Selector to set the spindle's direction of rotation.
4
"Trigger" button for starting the drill;
5
Compressed air inlet nozzle.
Figure 1 - Main parts of the drill.
2.1 Technical specifications
Operating pressure (kPa / bar)
600 / 6
Air consumption (l/min)
570
Rotation speed (rpm)
1800
Empty weight (kg)
0.85
Sound pressure level emitted into the environment (dB (A))
93
Vibration transmitted to the hand-arm system (m/s
2
)
2
1
3
4
5