Operation and maintenance manual digital paint stripper art. 0444 original instructions fervi.Com.
Hardware page 2 of 9 foreword read this manual before operating any machinery original instructions before starting any operation it is compulsory to read this instruction manual. The guarantee of smooth operation and full performance of the machine is highly dependent on the application of all the ...
Hardware page 3 of 9 contents 1 precautions with regard to electric shock.................................. 4 1.1 technical support..........................................................................................................4 2 description of the paint stripper and intended use ...........
Hardware page 4 of 9 1 precautions with regard to electric shock risks associated with electric shocks check that the power plug is disconnected before touching live parts. make sure the power supply complies with the machine's required voltage and frequency requirements. do not use different ...
Hardware page 5 of 9 2 description of the paint stripper and intended use the paint stripper (art. 0444) is a device that produces a powerful jet of hot air, to be used exclusively for the removal of layers of paint. It is intended for indoor use. Do not expose to rain or moisture and always store i...
Hardware page 6 of 9 2.1 technical specifications voltage 230 v frequency 50 hz power 2000 w airflow step i 300 l/min step ii 300 l/min step iii 500 l/min air temperature step i 70° c step ii 70° - 600 °c step iii 70° - 600 °c 3 improper use and contraindications it is strictly forbidden to: place...
Hardware page 7 of 9 4 commissioning 4.1 installation open the plastic case containing the paint stripper and all the accessories. Lay the paint stripper on the workbench. 5 how to use 5.1 power on / off insert the plug into a 230 v (50 hz) socket. To remove the plug, hold it by the body and never p...
Hardware page 8 of 9 n.B. The paint stripper is designed to remove water and oil-based paints. Conversely, it is not suitable to deal with fillers. select the operating mode on the paint stripper by moving the four-position switch located on the back of the handle. use the control system on the ...
Hardware page 9 of 9 6 maintenance and cleaning the purpose of this chapter is to provide all the cadences and maintenance procedures necessary to maintain the efficiency of the paint stripper. Intervention frequency daily weekly 1. General visual inspection x 2. General cleaning x 3. Clean the air ...
