Fervi 570 User And Maintenance Manual - Fervi.Com
HARDWARE
Page 12 of 13
6 MAINTENANCE AND CLEANING
The purpose of this chapter is to provide all the information on maintenance procedures and
their frequency as required by the machine.
ACTION
Frequency
Daily
Weekly
1. General visual inspection
X
2. General cleaning
X
3. Clean the air outlet nozzle
X
4. Lubricate moving parts
X
1. General Visual Inspection: check the overall condition of the pneumatic tool,
particularly for any damaged or missing parts. Also check for the presence and
legibility of labels.
2. General cleaning: cleaning is necessary to rid the body of oil deposits, dust or dirt
accumulation.
Risks Associated with Cleaning
Disconnect the air supply hose and clean the body of the tool. Do not use organic solvents to
avoid corrosion or discolouration.
3. Clean the air outlet nozzle: cleaning is necessary to free the hot air outlet nozzle
and dirt accumulation filter.
Do not use paint thinner, gasoline, or similar substances to clean the nozzle.
4. Lubricating moving parts: lubricate all the gears and moving mechanical parts on
the grinder by inserting, at least once a day, lubricating oil within the compressed air
intake nozzle.
To do this, disconnect the air hose, turn over the grinder and put a few drops of oil into
the nozzle using an oiler.
Figure 8 - Lubrication