Festool C 12 Li User Manual - page 5
C 12 Li, C 15 Li
13
GB
Original operating manual
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1
Symbols
2
Machine features
3
Intended use
Cordless drills are suitable for drilling into
metal, wood, plastics and similar materials
as well as inserting and tightening screws.
The charger TRC 3 is designed for charging
the battery packs listed.
The user shall be liable for damage and
accidents resulting from non-specified
use; this also includes damage and
wear caused during industrial continu-
ous operation.
4
Technical data
1
Symbols .................................. 13
2
Machine features ...................... 13
3
Intended use............................ 13
4
Technical data .......................... 13
5
Safety instructions .................... 14
6
Operation ................................ 15
7
Settings................................... 16
8
Tool holder, attachments ............ 16
9
Working with the machine .......... 16
10
Service and maintenance ........... 17
11
Accessories .............................. 17
12
Disposal .................................. 17
13
Transport ................................. 17
14
Warranty ................................. 18
15
EU Declaration of Conformity ...... 18
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear protective gloves.
Do not throw in the household waste.
[1-1]
Torque thumbwheel
[1-2]
Bit store
[1-3]
LED lamp
[1-4]
Gear switch
[1-5]
Drilling symbol
[1-6]
Screwdriving symbol
[1-7]
Drilling/Fastening selector switch
[1-8]
Right/left switch
[1-9]
On/Off switch
[1-10]
Belt clip
[1-11]
Buttons for releasing the battery
pack
Cordless drill
C12 Li
C15 Li
Motor voltage
10.8 – 12 V
14.4 – 15.6 V
Idling speed*
1st gear
0 - 450 rpm
2nd gear
0 - 1500 rpm
Max. torque
Soft material (wood)
20 Nm
25 Nm
Hard material (metal)
34 Nm
40 Nm
Adjustable torque**
1st gear
0.5 - 8 Nm
2nd gear
0.5 - 6 Nm
Chuck clamping range
1.5 - 13 mm
Drill diameter max.
Wood
25 mm
35 mm
Metal
14 mm
16 mm
Tool holder in drill spindle
1/4 ’’
1/4 ’’
Weight without battery pack with Centrotec
1.0 kg
1.0 kg