Festool CLEANTEX CTL 26 E SD Original Operating Manual - page 14

14

CLEANTEX CTL/ CTL AC 

GB

4

Intended use

The mobile dust extractors are designed for

extracting hazardous dusts with values up to

1 mg/m³ corresponding to dust class ’L’ in

accordance with IEC 60335-2-69.

The extractors are designed to extract water.

The extractors are designed for heavy-duty

applications and industrial use in accordance

with EN 60335-1 and EN 60335-2-69.

The user bears the responsibility for

damage and accidents caused by im-

proper use.

5

Safety  instructions

Warning! Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in elec-

tric shock, fire and/or serious injury.

Save all warnings and instructions for

future reference.

– The machine is not intended for use by

persons (including children) with limited

physical, sensory or mental ability or with-

out sufficient experience and/or knowl-

edge, unless they are supervised by a

person responsible for their safety or have

been instructed on how to use the ma-

chine. Children should always be super-

vised to ensure that they do not play with

the machine.

– Warning:the machine may contain haz-

ardous dust. Only authorised and qualified

personnel with suitable protective equip-

ment may perform maintenance work, in-

cluding emptying the container and

changing the filter. Do not operate the ma-

chine without a fully fitted filter system.

– When handling and extracting dusts that

are hazardous to health, the safety regula-

tions applicable in your country as well as

the specifications of the material manufac-

turer must be observed without fail.

– When extracting hazardous dust or large

quantities of oak or beech dust, only use

the machine in combination with a single

electric or pneumatic tool.

– Risk of explosion and fire hazard: do

not extract sparks or hot dust, flammable

or explosive dust (e.g. magnesium, alu-

minium), flammable or explosive fluids

(e.g. petrol, thinner), aggressive fluids/

solids (e.g. acid, leach, solvent). The ex-

traction of wood dust is permitted. This

mobile dust extractor is suitable for ex-

tracting paint dust. Operate the machine in

a well-ventilated room (observe national

industrial safety regulations).

– Do not damage the mains power cable

(e.g. by driving over, dragging, etc.). Pro-

tect from heat, oil and sharp edges. Do not

pull the plug from the socket by the cable.

– Check the plug and the cable regularly and

have them replaced by an authorised ser-

vice workshop should either become dam-

aged cable with the type specified in the

spare parts list. Always replace the mains

power cable with the type specified in the

spare parts list.

– Do not expose the machine to rain.

– The machine should only be used by ap-

pointed persons instructed in correct ma-

chine handling.

– Before use, operators shall be provided

with information, instruction and training

for the use of the machine and the sub-

stances for which it is to be used, including

the safe method of removal and disposal of

the material collected.

– For reasons of safety, never operate the

machine from an unearthed socket.

– Always use the machine socket for the pur-

pose specified in the manual.

– Always use original Festool accessories.

– Pull the plug from the socket when the ma-

chine is not in use and prior to mainte-

nance and cleaning work. 

– Do not lift or transport the machine by the

handle using a crane or lifting gear.

Weight

CTL 26 E, CTL 26 E SD

13.9 kg

CTL 36 E, CTL 36 E LE

14.4 kg

CTL 26 E AC

14.7 kg

CTL 36 E AC, CTL 36 E LE AC

, 

CTL 36 E AC-LHS

15.2 kg

Mobile dust extractors