1. DL manuals
  2. Festool
  3. Planer
  4. EHL 65 E
  5. Operating Instructions Manual

Festool EHL 65 E Operating Instructions Manual

Manual is about: One handed planer

Summary of EHL 65 E

  • Page 1

    468 035_002 festool gmbh wertstraße 20 d-73240 wendlingen telefon: 07024/804-0 telefax: 07024/804-608 http://www.Festool.Com ehl 65 e bedienungsanleitung/ersatzteilliste*) 4 - 6 operating instructions/spare parts list*) 7 - 9 mode d’emploi/liste de pièces de rechange*) 10 - 12 instrucciones de servi...

  • Page 2

    1.1 1.2 1.4 1.5 1.6 1.7 1.9 1.10 1.11 1.12 1.13 1.14 1.8 1.3 1 seen at ideal tools..

  • Page 3

    2.4 2.1 4.1 2.2 2.5 2.3 2.11 2.10 2.9 2.8 2.7 2.6 2 3 4 seen at ideal tools..

  • Page 4

    7 technical data ehl 65 e power 720 w speed (no load) 15 600 rpm plane width 65 mm chip thickness 0 - 4 mm max. Rebate depth 23 mm weight (excluding cable) 2.4 kg degree of protection / ii the specifi ed illustrations can be found at the beginning of the operating instruc- tions. 1 intended use the t...

  • Page 5

    8 - always disconnect the mains plug from the socket before changing the cutter. - loosen the locking screw (2.9) by approx. 2 revolutions with the allan key (2.6) and remove the cutter from the cutter shaft. - clean the cutter slot before inserting the new cutter to ensure a correct fi t. - then ins...

  • Page 6

    9 10.1 chamfering the front planer platen is equipped with a 90° v groove (2.11) to allow the chamfering of workpiece edges. This v groove is 2 mm deep, thus producing a 2 mm edge chamfer with the chip thickness setting 0. 10.2 bench-mounted operation the planer can be operated bench-mounted in conj...

  • Page 7

    46 ce-konformitetserklæring. Vi erklærer på eget ans- var at dette produktet er i overensstemmelse med følgende normer eller normative dokumenter: en 60 745, en 55 014, en 61 000 i henhold til bestemmelsene i direktivene 98/37/ef, 89/336/eØf. Eg-konformitätserklärung. Wir erklären in alleini- ger ve...