1. DL manuals
  2. Festool
  3. Power Tool
  4. PSBC 420 EB
  5. Operating Manual

Festool PSBC 420 EB Operating Manual

Summary of PSBC 420 EB

  • Page 1

    10004955_003 festool group gmbh & co. Kg wertstraße 20 d-73240 wendlingen tel.: +49 (0)7024/804-0 telefax: +49 (0)7024/804-20608 www.Festool.Com originalbetriebsanleitung 6 original operating manual 14 notice d’utilisation d’origine 22 manual de instrucciones original 31 istruzioni per l'uso origina...

  • Page 2

    1-1 1-9 1-10 1-11 1-12 1-9 1-10 1-11 1-12 1-8 1-6 1-7 1-8 1-6 1-7 1-2 1-1 1-2 1-5 1 1-5 1-3 1-4 psc 420 eb psbc 400 eb.

  • Page 3

    2 klick 4 mm 96 mm 3 3-1.

  • Page 4

    Psc psc 1. 2. Ca. 3 mm psc 4-1 4-2 4-4 4-5 4-6 4 5-2 5-1 5 + - 4-3.

  • Page 5

    14 c a r v e x gb original operating manual 1 symbols 2 machine features the illustrations specified are located at the begin- ning and end of the operating manual. 3 intended use jigsaws are designed for sawing wood and similar materials similar to wood. With the special saw blades offered by festo...

  • Page 6

    C a r v e x 15 gb 5 safety instructions 5.1 general safety instructions warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future ref- erence. The ter...

  • Page 7

    16 c a r v e x gb erates dust, and protective gloves when working with raw materials and when changing tools. – always secure the workpiece in such a manner that it cannot move while being sawed. – always connect the machine to a dust extractor when work involves dust generation. – stroboscopic ligh...

  • Page 8

    C a r v e x 17 gb 6.4 charger wall mount the charger trc 3 has two elongated holes on its back. It can be mounted on a wall using two screws (e.G. Round head or flat head screw with shank di- ameter of 5 mm) (see fig. [3]). 7 settings 7.1 changing tools selecting saw blade only use saw blades with a...

  • Page 9

    18 c a r v e x gb 7.3 inserting the splinterguard the splinterguard prevents the edges of the mate- rial from splintering during the cut, even at the end where the saw blade exits the material. Switch off the machine and slide the splinter- guard [5-1] into the guide [5-2] and up to the saw blade, s...

  • Page 10

    C a r v e x 19 gb when working on small or thin workpieces, always use a stable base, or the cms module (accessory). When working, hold the electric power tool by the handle and guide it along the desired cutting line. For precise cuts and smooth running, use two hands to guide the electric power to...

  • Page 11

    20 c a r v e x gb information on battery packs – where possible, store the battery pack in a cool, dry place at a temperature between 5 °c and 25 °c. – battery packs are most efficient at temperatures between 20 °c and 30 °c. – protect the battery pack from moisture, water and heat. – significantly ...

  • Page 12

    C a r v e x 21 gb place the jigsaw with attached adaptation table on the adapter [11-1] on the circle cutter. Insert the centring mandrel [11-2] in the hole [11-4] on the circle cutter aligned with the saw blade. Clamp the measuring tape to the circle cutter using the rotary knob [11-5]. Recommended...