Festool TI 15 Operating Manual - page 5
TI 15
13
GB
Original operating manual
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1
Symbols
2
Machine features
Accessories shown or described are some-
times not included in the scope of delivery.
3
Technical data
* electronically limited
1
Symbols .................................
13
2
Machine features......................
13
3
Technical data..........................
13
4
Intended use ...........................
14
5
Safety instructions ...................
14
6
Operation................................
15
7
Settings ..................................
16
8
Tool holder, attachments ...........
16
9
Working with the machine .........
17
10 Service and maintenance ..........
18
11 Accessories .............................
18
12 Disposal..................................
18
13 Transport ................................
18
14 Warranty.................................
19
15 EU Declaration of Conformity .....
19
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear protective gloves.
Do not throw in the household waste.
Operating mode Impact screw driver
Operating mode Screwing/Drilling
without impact
[1-1]
Bit store
[1-2]
On/Off switch
[1-3]
Right/left switch
[1-4]
LED lamp
[1-5]
CENTROTEC tool chuck
[1-6]
Thumbwheel Speed/Impact rate
[1-7]
Capacity display
[1-8]
Battery pack
[1-9]
Belt clip
[1-10] Buttons for releasing the battery
pack
[1-11] Adapter for FastFix attachments
[1-12] 13 mm chuck
[1-13] Elbow adapter
[3-1]
Charger
Cordless impact screw driver
TI15
Motor voltage
14,4 V
Idling speed
0 - 2600 rpm
Impact rate
2400 - 3600 rpm
Max. torque
Hard material (metal)
100 Nm*
Chuck clamping range
1,5 - 13 mm
Drill diameter max.
Wood
13 mm
Metal
10 mm
Max. screw diameter in spruce
Up to 8x160 mm
Tool holder in drill spindle
1/4 ’’
Weight without battery pack with Centrotec
1,2 kg