1. DL manuals
  2. Fetco
  3. Dispenser
  4. L3D Series
  5. User Manual

Fetco L3D Series User Manual

Summary of L3D Series

  • Page 1

    L3d-10 1 gallon l3d-15 1.5 gallon l3d-20 2 gallon revised vacuum dispenser user guide © 2012 food equipment technologies company fetco®, luxus®, driven to innovation™, freshness time™, and volume indicator™ are trademarks or trade names of food equipment technologies company. Part # p015 rev. 004 ma...

  • Page 2: Important Safeguards

    Important safeguards f to prevent overflows, make sure the dispenser is completely empty before brewing . F always remove the funnel for manual filling of the dispenser. F do not use bleach or cleaners containing chlorides. F do not use solvent based cleaner or polish on this equipment. F use only n...

  • Page 3: Brew Funnel Display

    Brew funnel display time is reset when dispenser is completely emptied, when funnel is removed, or when enough liquid is added to increase the volume by at least one level. Example - for l3d-15: example - for l3d-10: = each segment = 15 minutes. = 1 hour. New configuration 5-2011 each bar equals: 20...

  • Page 4: Opening The

    Opening the dispenser lid opening and closing the cover plug removing the brew funnel important notice: to maintain proper operation of the funnel display, clean the funnel stem daily under running water with detergent and a sponge or towel. Do not use abrasives or submerge. • brew funnel must be re...

  • Page 5: Removing The Drip Tray

    Removing the drip tray removing the faucet guard removing the faucet 1) press and hold down latch release 2) slide out drip tray. 3) separate tray from cover to clean 1) press faucet release latch up. 1) unscrew knob 4 turns 2) slide faucet guard out . 1) (knob) 1) 2) 3) 2).

  • Page 6: 2) Rotate Faucet 180°

    2) rotate faucet 180° 3) pull out. (replace gasket if removed) 4) unscrew faucet upper assembly to clean or replace seat cup. To reinstall: 5) press release latch down to lock faucet in place. Removing the faucet-continued.

  • Page 7: Replacement Parts

    Replacement parts.

  • Page 8

    Dispenser model number item description l3d-10 & l3s-10 l3d-15 & l3s-15 l3d-20 & l3s-20 1a lock (inside cover) 1023.00036.00 1023.00030.00 1023.00030.00 1b plug assy. 1023.00119.00 1023.00125.00 1023.00125.00 2 cover assy. 1102.00125.00 1102.00144.00 1102.00144.00 3 handle assy. 1000.00006.00 1000.0...