Fetco L3D Series User Manual - Important Safeguards
IMPORTANT SAFEGUARDS
f To prevent overflows, make sure the dispenser is completely
empty before brewing
.
f Always remove the funnel for manual filling of the dispenser.
f Do not use bleach or cleaners containing chlorides.
f Do not use solvent based cleaner or polish on this equipment.
f Use only non-metallic brushes and cleaning pads.
f Use only the handle to lift or carry the dispenser.
f Do not use the faucet guard to pull or lift the dispenser.
f Do not submerge the brew funnel
.
CLEANING AND MAINTENANCE
Detailed instructions are available on our web site, www.fetco.com.
Daily:
Important Notice: To maintain proper operation of the funnel
display, clean the funnel stem daily under running water with
detergent and a sponge or towel.
Do not submerge. Do not use abrasives of any kind
f Use any commercial beverage urn cleaner to clean the inside of
the dispenser. Follow the cleaner manufacturer’s instructions.
Make sure to thoroughly rinse the dispenser after cleaning.
f Wash the drip tray and other plastic parts with dish detergent.
Avoid abrasives.
f To sanitize the dispenser before filling, brew a batch of water only
(no coffee) into the dispenser and allow it to rest for 10 minutes.
Weekly, or as needed:
f Remove the faucet upper assembly and inspect the seat cup for
wear. Clean or replace if necessary.