Summary of Titania
Page 1
Titania user’s manual.
Page 2
2 safety tips______________________________________________ • never place the fezz audio titania amplifier near heat sources, such as radiators, heaters or direct sunlight. Ensure adequate ventilation and airflow • we also warn against exposure of the amplifier to conditions such as very low tempera...
Page 3
3 table of contents_______________________________________ safety tips 2 introduction 4 vacuum tube amplfier 4 installation of the device 5 unpacking 5 contents of the package 5 discription of elements of the amplifier 6 installation of the vacuum tubes 7 where to place your amplifier 7 interconnect...
Page 4
4 introduction___________________________________________ thank you for your trust and for choosing the fezz audio titania amplifier. At times when the audio world becomes increasingly digital, fezz audio does not forget about analog lovers. Titania is the polish, series produced integrated vacuum t...
Page 5
5 installation of the device_______________________________ unpacking please kindly check if the packaging of the titania amplifier has not been damaged during transit. If you find any damages, please immediately contact your dealer. Remove the amplifier and accessories from the packaging. Make sure...
Page 6
6 discription of elements of the amplifier 1,3) el34 power tubes socket for a left channel 2) 12ax7 driver tube socket for a left channel 4,6) el34 power tubes socket for a right channel 5) 12ax7 driver tube socket for a right channel 7) volume control potentiometer 8) input source selector 9) housi...
Page 7
7 installation of the vacuum tubes place the titania amplifier on a stable surface. Carefully remove the vacuum tubes from their packaging and install them in the appropriate sockets, as show below, and adhering to the numbering scheme as identified on the packaging. Please pay attention to the diam...
Page 8
8 interconnections_______________________________________ 1) source signal inputs 2) speakers outputs for the right channel 3) speakers outputs for the left channel 4) socket for the main fuse 5) iec power supply cord socket 6) mains switch the figure above shows the rear panel view of the fezz audi...
Page 9
9 follow the instructions below to connect your sound system correctly. Step 1 / hook-up of the speakers check the impedance of the speaker set that you posses. Connect the speaker cable to the appropriate terminals on the rear panel of the amplifier. Depending on the impedance of the speakers that ...
Page 10
10 ”burning-in” the amplifier any tube amplifier requires an initial pre-heating (or "burn-in") period, in order so that it achieves its full sonic potential. This is due to the presence of residua polarization of dielectric elements and due to a necessary stabilization of working parameters of the ...
Page 11
11 optional equipment_________________________________ vacuum tube protective cage the following picture show the correct positioning of the optional protective cage for the tubes. Ht (pre-in) input the additional ht (pre-in) signal input makes it possible to use this amplifier as a stereo power amp...
Page 12
12 trouble-shooting guide_________________________________ if your amplifier does not work as it is supposed to, it is fairly easy to diagnose and remedy some of the common malfunctions, by following procedures as outlined in this following. The problem probable reason the solution after turning the...
Page 13
Declaration of conformity manufacturer: toroidy.Pl transformatory l. Lachowski sp.K. Address: ul. Mazowiecka 20 16-001 księżyno poland i declare that the product: name: fezz audio vacuum tube amplifier type: titania complies with the following european union council electromagnetic compatibility (em...