FHF Intelly Com Operating Manual - page 13
13 / 18
Defining Call Procedures
To Define a Call from the Speed Dial Telephone Number List
You can define this call scenario by programming a maximum of 8 desired telephone
numbers in the number list memory M1-M8. After pressing the on/off button, the
station then attempts to connect to the programmed numbers beginning with M1 in
ascending sequence. The process ends when a connection has been established to
one of the programmed numbers or when the station shuts off after all connection
attempts have failed.
Example:
#1234#
Receive programming authorization.
*5001*100*
1. Program the memory of the speed dial list, to define party no. 100,
for example.
*5002*101*
2. Program the memory of the speed dial list, to define party no. 101,
for example.
*5003**
3. Delete contents of the speed dial memory to terminate the speed
dial number list.
*2015*
Set minimum ringing duration to e.g. 15 sec, to determine how long
IntellyCom should wait for a currently dialed connection to be
established before it moves on to dial the next number on the dial list
or shuts off when the end of the list has been reached.
To Define a Call through Private Branch System
You can define this call scenario by deleting the M1 speed dial number list memory.
After pressing the on/off button, the station occupies the line and waits for the
connection that the private branch device has dialed. The process ends when the
connection has been established or when the minimum programmed call duration
*20xx* (15 sec) has expired and the station shuts off.
Example:
#1234#
Receive programming authorization.
*5001**
1. Delete contents of the speed dial number list memory, to set an
empty list.