Fhiaba Refrigerator User Manual - page 16
14
5
5.3
www.fhiaba.com ∙ info@fhiaba.com ∙ Info Line 800-344222 ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
Settings and Special Functions
The display visualizes the hours and minutes in the format hh:mm
and with hh: blinking. Use the Up/Down buttons to modify the setting
and then confirm by pressing Enter to go on to the next setting.
Once the minutes are confirmed, the time will be set.
Time
Set Time
How to set the time
This offers the possibility to reset default factory
settings and cancels any previous changes.
Default Setting
How to reset default settings
Using this function it is possible to deactivate/activate the date
visualization on the display.
Show Date
How to activate the date
How to deactivate the date
The display will visualize the date in the format dd:mm:yy
(day:month:year), the day will blink. Use the Up/Down buttons
to modify the setting, confirm with Enter to go on to the next setting;
once the year is confirmed the date will be set.
Date
Set Date
How to set the date
Select the Fhiaba Access button and used the Up/Down button
to select .
The freezer compartment can, if required, be converted
to the refrigeration o Fresco operating mode.
TriMode Options
How to set the Fridge function
How to set the Fresco function
How to revert to the Freezer function
Basic settings of the Fhiaba Access Menu
The View Status function permits visualizing the exact quantity of filtered
air in liters and the time left before the filter needs to be replaced. The
Reset Filter function sets to zero the quantity of air filtered and the time
left before the filter needs to be replaced. It is necessary to set the
meter to zero each time the cartridge is replaced.
Ari Filter
How to check the status of the filter
How to set the filtered water meter to zero