FIA ON3 User Manual - Chapter 2: On3 Setup
ON3 SETUP
FIA On3 and On3-xr User’s Guide
13
Chapter 2: On3 Setup
Setting up and configuring the On3 Media Server is no more difficult than
adding a piece of equipment to your home entertainment center.
Everything you need to know is included in this chapter. Advanced users
may wish to refer to the On3 Quick Setup Guide for more concise
instructions.
Before you Begin
Before you begin, make sure you have the following minimum
requirements:
• Quality video and/or audio output device such as a
television, monitor or home stereo system.
• PC system or home network with a functioning Ethernet
port or a wireless network (if purchased wireless On3
option).
• Digital media in AVI, MPEG, MP3 and JPEG formats.
Hardware Setup
Follow the instructions below to set up the On3 hardware:
Placement
When deciding where to place your new On3 system, consider the
following guidelines:
• The On3 unit should be placed on a flat, sturdy surface.
• Sufficient space should be provided behind the unit to
accommodate cabling and cooling.
• The IR receiver on the front bezel should not be obstructed.