Fiamma MCF 2 Instruction Manual - page 5
5
INSTRUCTIONS MANUAL
WORKING INSTRUCTIONS
1. - Put the coffee grinder on a flat and stable surface.
2. - Put the ungrounded coffee in the hopper making sure that it is closed.
2.1. -
Press the brake of the grinding blade holder and turn it clockwise until you feel it
touches the lower grinding blade.
Taking into account the making on the grinding blade holder turn it 4 or 5 points on the
opposite direction.
2.2. -
Switch on the grinder by making the motor run and only then open the hopper
lock.
Take off some ground coffee from the dosing device and make sure that the grinding is as
required.
2.3. -
If the grinding is not as required, one should take as reference the point where is
the grinding blade holder and turn the grinding blade holder 1 or 2 positions.
2.4. -
After having adjusted the grinding, the dosing device must be adjusted by taking
off the cover and turning the central shaft:
- Turn clockwise - less coffee
- Turn counter clockwise - more coffee
By using the dosing lever, you should make sure that each dose has the required quantity
of coffee.
The grinder is now ready to work.
In the course of time it becomes necessary to readjust the grinding, since the grinding
blades become worn out by use.
CLEANING
The coffee hopper must be washed periodically after being taken off from the grinder, in order to
remove any coffee fat excess.
Always switch off the Coffee Grinder before performing any cleaning operation.
Do not use jets of water during cleaning operations.
MAINTENANCE AND REPAIR
The replacement of the grinding blades or any other repairement operation should always be
carried out by a qualified technician and original components must always be used.
GB – SET. 2008