Fiamma Turbo-Vent P3 Instructions For Use Manual - page 5
MOTOR
MOTOR
TV
TV
Achtung: Polarität nicht umkehren.
Attention: ne pas invertir la polarité.
Attention: do not invert polarity.
Attenzione: non invertire la polarità.
12V
dc
NO 220V.
7
CIRCUIT CONNECTION TO 12 V FEEDING
JONCTION DU CIRCUIT A L’ALIMENTATION 12 V
KREISVERBINDUNG ZU 12 V STROMZUFUHR
COLLEGAMENTO DEL CIRCUITO ALL’ALIMENTAZIONE 12 V
12V
5
12
Your Turbo-Vent P3 can be completed with the blind kit art. n. 98683-033.
Installation is simple; it is fitted to the inside of the Turbo-Vent Pro frame
with just 4 screws.
Vor der Inbetriebnahme Regler auf "OFF” setzen.
Avant de connecter les fils de l'alimentation du
moteur s'assurer que le régulateur de vitesse soit
en position "OFF”.
Before connecting feeding threads make sure
that speed control is in "OFF” position.
Prima di collegare i fili di alimentazione, assicurarsi
che il regolatore di velocità sia in posizione “OFF”.
OFF
OFF
ON
ON