Fiat Croma User Manual - page 12
TRY OUT THE VOICE
COMMANDS
At each stage of your dialogue with the
system, you can always use the voice com-
mand “Help”, to get detailed indications
about the voice commands available at the
current dialogue stage.
To try out the “Help” function, proceed
as follows:
❒ Press the steering wheel button
‘
.
❒ After Blue&Me™ plays a tone indi-
cating that voice recognition is active,
pronounce “Help”. Blue&Me™ will
speak the list of voice commands avail-
able.
❒ After the general help message is fin-
ished, pronounce “Settings” and then
“Help”. Blue&Me™ will speak again
the list of voice commands available for
the SETTINGS menu.
❒ You can then pronounce one of the
available commands and proceed with
the dialogue as you like.
❒ If you need further help, press
‘
and
pronounce again “Help”.
PAIR YOUR MOBILE PHONE
IMPORTANT Carry out this operation
only with the car stopped.
To pair your mobile phone, proceed as
follows:
❒ Press
‘
and pronounce “Settings”
then, at the end of the Blue&Me™
message say “Pairing”.
❒ The system will show the phone pair-
ing PIN number on the multifunction
display. For the next two steps, consult
your mobile phone owner’s manual
about Bluetooth
®
pairing.
❒ On your mobile phone, query for de-
vices equipped with Bluetooth
®
wire-
less technology (the setting on your
mobile phone might be called Discover
or New Device). In this list you will find
“Blue&Me” (name identifying the
Blue&Me™ system on your car): se-
lect it.
❒ When prompted by the mobile phone,
enter the PIN number shown on the in-
strument panel display using your mo-
bile phone keypad. If pairing is success-
ful, the system will say “Connecting”
and at the end the display will show as
confirmation message, the ID of the
paired mobile phone.
It is essential to wait until you see this con-
firmation message on the display. Pressing
ß
or ESC before the message is displayed
may cancel the pairing process. If the pair-
ing process fails, an error message will be
displayed: in this event repeat the pairing
procedure.
❒ At first pairing, Blue&Me™ will say
“Welcome” immediately after connect-
ing. This message will no longer be heard
at next pairing procedures.
11
603_97_178 CROMA BLUE&ME GB 1ed 7-05-2009 15:28 Pagina 11