Fiat Croma User Manual - page 44
EXIT THE SETTINGS MENU
At the end of any of the operations de-
scribed above, you can exit the settings
menu as described below.
?
To exit the SETTINGS menu us-
ing manual interaction:
Select EXIT and then press OK or
ß
.
}
Or, using voice interaction:
Press
‘
and pronounce “Exit”.
Changing the GPRS code
If your mobile phone carrier requires to
change the GPRS code, you can perform
this operation via the ADV. OPTIONS
menu.
?
To change the GPRS code using
manual interaction, proceed as fol-
lows:
Go to the GPRS CODE menu and
press OK or
ß
.
The display will show GPRS:, and a
list of digits (1, 2, 3, 4, 5, 6, 7, 8, 9),
DEFAULT, and DISABLE. To
select the new GPRS code, press Q
and Z until choosing the required
option, then press OK or
ß
. To
store the default value, select DE-
FAULT. To disable the connection
code, select DISABLE.
After setting the new GPRS code,
Blue&Me™ will display the mes-
sage GPRS CODE SET.
}
To set the GPRS code using voice
interaction, proceed as follows:
Press
‘
, pronounce “Settings”
and then “Connection code”.
Blue&Me™ will prompt “The cur-
rent GPRS connection code is value.
To change code say a number from
1 to 9 or say “Default”. To disable
the connection code say “Disable”.
To change the code, say a number
from 1 to 9 or say “Default”. To dis-
able the connection code say “Dis-
able”. (In previous text, value is the
GPRS connection code set at that
moment).
After setting the new connection
code, Blue&Me™ will say “The
Connection Code is set to value”
(here value corresponds to the new
GPRS code set).
43
603_97_178 CROMA BLUE&ME GB 1ed 7-05-2009 15:29 Pagina 43