FRADAN PB-10 IC Operator's Manual

Summary of PB-10 IC

  • Page 1

    Warning danger read instructions carefully and follow rules for safe operation. Failure to do so could result in serious injury. Operator manual fradan manufacturing corp. Www.Fradanpower.Com fradan power blowers pa rt no .8 88 -0 11 -2 22 -0

  • Page 2

    2.

  • Page 3: Welcome to The Fradan Family

    Welcome to the fradan family congratulations! You are now the owner of a quality fradan power blower. Fradan manufactures a family of high performance, reliable power equipment. Our designs are based on years of personal use of landscape equipment. We at fradan have revolutionized the landscaping in...

  • Page 4: Introduction

    4 introduction the fradan push blower model is a ruggedly built, high performance gasoline powered unit specially designed for blowing leaves and debris. Proper maintenance and use of the fradan blower will guarantee years of safe, service-free, reliable operation. We wish for you to gain sufficient...

  • Page 5: Graphic Warnings

    5 graphic warnings because a power blower uses gasoline and blows air and debris at a high speed, safety precautions must be observed to reduce the risk of personal injury. Read this manual carefully. Be familiar with the controls and the prop- er use of the machine. Warning danger the engine exhaus...

  • Page 6: Safety Rules & Precautions

    6 safety rules & precautions proper safety precautions must be observed. Like all power equipment this unit must be handled carefully. Do not expose yourself or others to danger. Follow these general rules. Do not permit others to use this machine unless they are thoroughly responsible and have read...

  • Page 7: Safety Rules & Precautions

    7 safety rules & precautions • do not store in a closed area where fuel vapors can reach an open flame from hot water heaters, furnaces, etc. Store in a locked, well ventilated area only. • use only fradan original equipment parts when servicing the unit. This will ensure safe and proper performance...

  • Page 8: Assembly Instructions

    8 assembly instructions • remove blower unit from box and inspect for shipping damage. • position unit to rest on front cover. • remove wheel nuts and wheels with a 15/16 wrench. Handle assembly (refer to figure 1). 1. Insert lower handle (b) into upper handle (a) making sure that throttle guides ar...

  • Page 9: Fuel & Oil

    9 fuel & oil preparing for operations warning • never fill the fuel tank to the very top. • never add fuel to the tank in a closed non-ventilated area. • do not add fuel to this unit close to an open fire or sparks. • be sure to wipe off spilled fuel before attempting to start engine. • do not attem...

  • Page 10: Operating Instructions

    10 operating instructions for best performance, be sure engine recoil starter assembly, front air intake cover and air discharge are clear and free of leaves or other debris. Air stream can be directed by simply maneuvering the unit and directing the flow of air accordingly. Each unit is also fitted...

  • Page 11: Maintenance Instructions

    11 maintenance instructions 1. Keep all nuts, bolts, and screws tight. Never store the blower with fuel in its fuel tank inside a building or in a confined space where fumes may reach an open flame or sparks. 3. Always refer to the instruction manual for ımportant details if the product is to be sto...

  • Page 12: Fradan Manufacturing Corp.

    Fradan manufacturing corp. Www.Fradanpower.Com.