Francotyp-Postalia optimail 30 Installation Manual - Step 6
Access method
(extension only)
If you selected EXTENSION as your method of dialling
out (above) then please select
EXCHANGE DIGIT as your current setting.
The other option to toggle between is HOOK FLASH
but this is not used in the UK.
These options can be toggled between by pressing
Soft key 2 as above.
When EXTENSION is set as your current setting
please press CONTINUE.
Authorisation (Cont…)
11
Warning! Use only the power and modem
cables provided with the optimail 30 or
approved by Francotyp-Postalia.
Make sure that cables are not damaged.
Make sure the socket for connecting the
optimail 30 is close by and easily accessible
at all times.
Step 6
Connecting your optimail 30
Modem cable
Plug the modem cable into the modem
socket on the franking machine. The
modem socket is at the rear of the franking
machine. The spring on the plug must face
downwards.
Connect the modem cable to the BT jack
telephone socket (analogue). Digital telephone
systems will have to have an analogue line
patched over for the franking machine to use.
Power cable
Connect the power cable securely to the franking
machine. The power connection is at the
rear of the optimail 30.
Plug the power cable into a regular 240V socket.
8
Setting up your modem to dial out
You are now required to set up the modem
so that it can dial out of your building and
establish a connection to the Teleset
server where you download your postage
from.
•
If you are required to dial a number
to access an out side line please
ensure you have EXTENSION as
your current setting.
•
If you are NOT required to dial a
number to access an outside line,
please ensure you have DIRECT
LINE as your current setting.
You can toggle between these two set-
tings by pressing soft key 2, as shown
in the illustration.
•
Press CONTINUE when you are
happy.
Cont.....
Current Setting