Aux bank up/down with midi in footswitch instrukcja obsługi user manual bedienungsanleitung.
1 dear customer! Thank you for choosing our product. G lab aux bank up/down with midi in footswitch is an expansion module for gsc-3 and gsc-2 controllers with two footswitches to switch the banks which enable working with ten presets in the bank and a midi in input enabling to control the gsc by ot...
2 structure 1 - bank down footswitch 2 - bank up footswitch 3 - midi in channel setting switch.
3 4 - midi in connector 5 - midi thru connector 6 - cable with aux connector to connect gsc controllers connecting the controller before connecting the gsc-2 controller check if it posses firmware version 2.20 or higher. If it doesn’t it is needed to upgrade controller program by using g2soft..
4 before connecting the expansion module it is needed to set af2 (aux input function no. 2) at loop button settings (footswitch no. 8) and to choose cb2 or cb3 change bank mode (by using bank up/bank down footswitches). The module should be connected to the aux connector. The cable is 350 mm long an...
5 technical parameters dimensions: depth 115 mm width 90 mm heigh 62 mm weight 350 g power supply 12v from aux output.
6 fcc compliance this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: t...
7 declaration of conformity elzab s.A., ul. Kruczkowskiego 39, 41-813 zabrze, poland, declare under sole responsibility, that the following product: g lab aux bank up/down with midi in footswitch conforms with requirements of the ec council directives: ● 2006/95/eec low voltage directive, ● 2004/108...
8 do not place this product into the waste container ! This device is marked with a cross-lined waste container symbol according to 2002/96/eu directive on waste electric and elec- tronic equipment. Such marking informs that after usage equipment can not be trashed together with other household wast...
Company address elzab sa ul. Kruczkowskiego 39, 41-813 zabrze, poland phone: +48 32 272 20 21, fax: +48 32 272 81 90 sales & export department ...................................... Phone: +48 32 272 30 51 ext. 34, 39, 64 +48 32 272 20 21 ext. 308, 366, 468 e-mail: glab@glab.Com.Pl technical support...
