G-Lab AUX BANK UP/DOWN WITH MIDI IN FOOTSWITCH User Manual - page 6
4
Before connecting the expansion module it is needed to set AF2 (AUX input function
No. 2) at LOOP button settings (footswitch No. 8) and to choose cb2 or cb3 change bank
mode (by using BANK UP/BANK DOWN footswitches). The module should be
connected to the AUX connector. The cable is 350 mm long and its surplus should be
put inside the module.
Controlling via MIDI
Connect cable with MIDI signal to the MIDI IN input and set MIDI channel to
receive the commands by using MIDI CHANNEL switch.
The arrow-head indicates
set channel (A, B, C, D, E, F letters correspond with 10, 11, 12, 13, 14, 15
channels numbers and “0” digit indicates channel No. 16).
The module receives program Change commends in the range from 1 to 100
(program No. 100 corresponds with preset No. P00). It posses MIDI THRU output with
copy of MIDI IN signal.