G-lites 1200SZ User Manual - page 7
www.g-lites.com
7
2
. Installation and safety operation
• Installation Requirements
Please make sure to fasten the mounting bracket firmly before installing.
The mounting bracket must share the weight 10 multiple weight of the
moving heads.
• Connect the mounting bracket and fix the clamp firmly to the truss in order
to avoid the moving head from getting loose or falling down.
• The moving head should be mounted with appropriate clamp by using 2
bolts. The mounting bracket itself is attached to the bottom of the moving
head with 4 bolts provided in the package. Always make sure that the
moving head is anchored firmly to avoid any vibration or fall.
• For safety purposes the moving head should be connected with the safety
cable ends by looping the cable over the truss, running it through the
truss and the handle of the moving head .The safety cable will fasten the
moving head on the truss tightly to avoid any vibration or falling.
o
When installing the moving head, do not allow anyone nearby.
o
After installing the fixture, weekly inspection of the safety cable,
clamp or truss are necessary to moving head from slipping. If any
accidents occur, the manufacturer is not at fault.