G-lites 250S User Manual - page 6
www.g-lites.com
6
3
.
OPERATING DETERMINATIONS
This device is a moving-head spot for creating decorative effects. This product is only
allowed to be operated with an alternating current of 230V, 50Hz and was designed for
indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent operation breaks will
ensure that the device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
Never list the fixture by holding it at the projector-head, as the mechanics may be damaged.
Always hold the fixture at the transport handles.
When choosing the installation-spot, please make sure that the device is not exposed to
extreme heat, moisture or dust. There should not be any cables lying around. You endanger
your own and the safety of others!
The symbol determines the minimum distance from lighted objects. The minimum
distance between light-output and the illuminated surface must be more than this value.
Make sure that the area below the installation place is blocked when rigging, un-rigging or
servicing the fixture.
Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the correct
fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws
are tightly fastened.
The lamp must never be ignited if the objective-lens or any housing-cover is open, as
discharge lamps may explode and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature at=45
℃
must never be exceeded.
Operate the device only after having familiarized with its functions. Do not permit operation
by persons not qualified for operating the device. Most damages are the result of
unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety
reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the
product may suffer damages and the guarantee becomes void. Furthermore, any other
operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash