G-lites Beam 300 Manual - page 8
270°TILT movements with 8bit/16bit resolution
Automatic Pan/Tilt reposition accidental movement not controlled by control unit
3-pin DMX connectors for input and output
Graphic LED display with shuttle wheel
Aluminium structure with die-cast plastic cover
Two side handles for transportation
PAN and TILT lock for transport and maintenance
Lamp ON/OFF control from the lighting console with delay function
Function reset from the lighting console with delay function
Intelligent electric rectifier making the unit much brighter and stable
Switch power supply with short circuit protection
ction
Forced ventilation with axial fans
Hanging system with fast-lock OMEGA clamp on the base
In conformity to CE standards and GB 7000. 15-2000 Standard
10. Maintenance and Cleaning
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation
spots (ceiling, suspension, trussing).
3)Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4)The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.