G-Tek PWG-500 Quick Manual - Quick Guide
Menu
Select
Wi-Fi
On/Off
VoIP
GSM
ABC
DEF
JKL
GHI
PQRS
MNO
WXYZ
TUV
11
Quick Guide
Connecting to the PC
Use a mini USB cable to connect the
PWG-500 to a PC as shown.
Installing the USB drivers
and WIM
To use the PWG-500 as a USB modem
for your PC, you need to install the
drivers for the device. When you con-
nect the device to the PC, the PC
detects the new hardware and starts
the New Hardware Found Wizard. Fol-
low the instructions on the screen to
locate and install the USB drivers for
the PWG-500 on the PC. The USB
driver files can be found on the utility
CD provided in your package.
WIM (Wireless in Motion) is an appli-
cation that helps you in configuring
and using the PWG-500. The utility
CD contains two versions of WIM, one
for your PC and one for your PDA
(Pocket PC only). Select the appropri-
ate version of WIM from the utility CD and double-click Setup.exe. Follow the
instructions on the screen to install the software. Refer to your PDA documenta-
tion for details about installing software on your PDA.
Using WIM
The WIM application is a useful interface that lets you set up and configure the
PWG-500 from your PC or PDA. You can select GSM, VoIP, GPRS, and Wi-Fi pro-
files and personalize them according to your network specifications. You can also
use the application to download ringtones, configure SOS numbers for the phone,
and make any setup changes for the phone.
Menu
Select
Wi-Fi
On/Off
VoIP
GSM
ABC
DEF
JKL
GHI
PQRS
MNO
WXYZ
TUV