G-Tek PWG-500 Quick Manual - Quick Guide
Menu
Select
Wi-Fi
On/Off
VoIP
GSM
ABC
DEF
JKL
GHI
PQRS
MNO
WXYZ
TUV
9
Quick Guide
Wi-Fi settings
The general settings for Wi-Fi mode specify the type of wireless connectivity and
enable you to turn on Wi-Fi mode. Press Menu/Select and choose Settings, Wi-Fi,
General and choose one of the following options:
• Select Wi-Fi On/Off and select On to enable Wi-Fi mode.
• Select Wi-Fi Connectivity and select Automatic to connect to a wireless
network in the vicinity automatically. The PWG-500 scans for wireless
hotspots automatically. Alternatively, select Manual to connect to a wire-
less network manually. A list of hotspots is displayed. Select a hotspot to
connect to the corresponding wireless network.
VoIP settings
These settings provide the basic setup for VoIP mode. Press Menu/Select and
select Settings, VoIP, and General to configure these settings as follows:
• VoIP On/Off: enables or disables VoIP mode.
• Stun Server: specifies the Stun server for VoIP mode. Key in the server
name using the keypad.
• Speaker Volume: Adjusts the speaker volume in VoIP mode. Choose from
Level 1 through Level 10.
• Microphone Volume: Adjusts the microphone volume in VoIP mode.
Choose from Level 1 through Level 10.
• Preferred Codec: specifies the codec to be used for VoIP calls. Select from
GSM, a Law, H Law, G726, G729, and G723.1.