Gabarron ECOMBI ECO158 Installation Instructions And User Manual - 1. Important Instructions

Manual is about: wall fixed electric storage heater

Summary of ECOMBI ECO158

  • Page 1

    Instrucciones de instalaciÓn y uso installation instructions and user guide ecombi acumulador digital inteligente digital smart storage heaters eco158 eco208 eco308 eco408 lea estas instrucciones atentamente antes de instalar o utilizar el aparato por primera vez. Please read these instructions care...

  • Page 2: 1. Instrucciones Importantes

    Objeto 75 mm cortina, mueble o repisa min. 75 mm min. 250 mm min. 1. Instrucciones importantes cuando se utilicen aparatos eléctricos se deben seguir siempre unas precauciones básicas para reducir el riesgo de fuego, electrocución y daños a las personas, incluyendo las siguientes: • atencion: por fa...

  • Page 3

    3 importante: los procedimientos de cableado y de conexión deben estar de acuerdo con los reglamentos nacionales y locales en vigor. • la garantía no cubrirá cualquier daño causado por la no observancia de alguna de estas instrucciones. • la instalación del aparato debe realizarse de acuerdo con la ...

  • Page 4

    4 3.- retire el panel frontal quitando los dos tornillos de su parte inferior. Atornille al chasis los separadores laterales suministrados. 4.- coloque el ecombi en la zona donde va a ser instalado y marque con un lápiz los puntos de fijación a la pared. El propio acumulador le servirá de plantilla....

  • Page 5

    5 a continuación retire los tornillos que sujetan el panel de cierre interior y desmonte dicho panel. PrecauciÓn en la parte posterior de esta chapa se encuentra adherido un delicado panel de aislamiento microtherm, se debe manejar con extraordinario cuidado, procure no tocarlo. 8.- no desconecte la...

  • Page 6

    6 10.- sitúe de nuevo las resistencias en su posición inicial, de forma vertical. Coloque el piso inferior de ladrillos con la cara lisa hacia el exterior y sobre las lengüetas de las resistencias. Acabe de montar los ladrillos, colocando el piso superior. 11.- vuelva a montar el panel de cierre int...

  • Page 7: 3. Modo De Empleo

    7 tecla “-” : pulse esta tecla para disminuir los distintos valores. 3. Modo de empleo precauciÓn: no utilizar este equipo para secar ropa. No cubrir en ningún momento. ConexiÓn/ desconexiÓn interruptor general. Todos los modelos disponen de un interruptor en la parte posterior que permite la conexi...

  • Page 8

    8 modos de funcionamiento pulsando la tecla varios modos de funcionamiento pueden ser seleccionados: anti-hielo, solo acumulador, solo emisor, combinado y combinado automÁtico. 1 anti-hielo para activar este modo pulsar repetidamente la tecla hasta que en el display aparezca . La consigna pasa a ser...

  • Page 9

    9 4 combinado manual en este modo el ecombi funciona de manera combinada. El acumulador cargará en función de lo especificado en el modo solo acumulador y, cuando no esté cargando, ecombi podrá funcionar como emisor térmico completando las necesidades térmicas de la estancia. Para activar este modo ...

  • Page 10

    10 podemos, a continuación, seleccionar los días de la semana en los que el ecombi estará funcionando con normalidad o en modo antihielo permanente. Un ejemplo puede verse a continuación: en este ejemplo el ecombi funcionará en modo normal de lunes (día1) a viernes y en modo antihielo el sábado y el...

  • Page 11: 4. Problemas Y Soluciones

    11 4. Problemas y soluciones el ecombi no calienta comprobar que el ecombi no esté cubierto o las entradas de aire inferiores obstruidas. Si el limitador térmico lr ha actuado será necesario rearmarlo manualmente el ecombi no calienta lo suficiente comprobar que la temperatura seleccionada sea la ad...

  • Page 12

    12 7. CaracterÍsticas tÉcnicas *las resistencias eléctricas del acumulador y del emisor no funcionarán nunca de manera simultánea. Advertencia: para evitar sobrecalentamientos, no cubrir el aparato de calefacción. El símbolo en el producto o en su embalaje indica que este producto no se puede tratar...

  • Page 13: 1. Important Instructions

    13 1. Important instructions when using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • warning: please read all instructions before installing or using this heater for the first time. • ...

  • Page 14

    14 important: wiring procedures and connections shall be in accordance with the national and local codes having jurisdiction. • the warranty of the heater will not cover any damage caused by non observance of any of these instructions. • the installation must be carried out in accordance with the cu...

  • Page 15

    15 3. - take off the front panel by removing the two screws located at the bottom. Fix the lateral fittings to the metal structure by using the appropriate screws. 4. - place ecombi in your selected installation area. Use the heater fixing holes as a template and mark the wall through the fixing hol...

  • Page 16

    16 next unscrew the inner panel and remove it. Caution behind this inner panel there is a very delicate thermal insulation microtherm panel. It has to be handled with extreme care. Avoid touching it. 8.- do not disconnect the electrical heating elements. Remove the packing cardboard. Lift and tilt t...

  • Page 17

    17 10.- place the heating elements back into their original position. Place the other two rows of storage bricks with the flat side facing out and always on the heating elements supporting tabs. 11.- replace the inner front panel. If the bricks have been fitted correctly you will have no difficulty ...

  • Page 18: 3. Operating Instructions

    18 key “ - “ press the key to decrease different values 3. Operating instructions caution: do not use this heater to dry clothes. Do not cover this heater at any time. Connection/ disconnection power switch. All models are equipped with a switch on the back side panel. It is used to connect and disc...

  • Page 19

    19 operation modes: by pressing the key, various operation modes may be selected: frost protection, storage heater, emitter, ecombi manual or ecombi automatic. 1 - frost protection mode: to select this mode press the key several times until the message is displayed. The set up temperature will be 7º...

  • Page 20

    20 4 –ecombi manual mode: this mode will allow ecombi to operate the storage heater and the convector together in a combined way. The storage heater will charge based on the settings of “automatic storage heater mode” and if there is any kind of heat loss in the room and a decrease in the temperatur...

  • Page 21

    21 after that it is possible to select which days of the week ecombi will follow the selected mode operation or frost protection operation. An example can be seen here below. In this example ecombi will be operating in normal mode from monday (day 1) to friday, and in frost protection mode on saturd...

  • Page 22: 4. Troubleshooting

    22 4. Troubleshooting ecombi does not heat. Please check it is connected and switched on. Make sure the device is not covered or the lower air inlets are not obstructed. The lr safety limit may be activated; in this case it is necessary to rearm it manually.Please contact technician. Ecombi does not...

  • Page 23: 7. Technical Features

    23 7. Technical features * storage heater elements and emitter heating element will never operate at the same time. Warning: in order to avoid overheating do not cover the heater. The symbol on the product or in its packaging indicates that this product may not be treated as household waste. Instead...

  • Page 24

    Elnur s.A. Travesía de villa esther, 11 28110 algete - madrid tfno. De atención al cliente: +34 91 628 1440 www.Elnur.Es www.Elnur-global.Com www.Elnur.Co.Uk como parte de la política de mejora continua elnur s.A. Se reserva el derecho a realizar modificaciones técnicas sin previo aviso. As a part o...