Gage bilt products corp. 44766 centre court (586) 226-1500 clinton twp. Mi 48038 (586) 226-1505 fax e-mail:solutions@gagebilt.Com / www.Gagebilt.Com gage bilt made in u.S.A. Gbp744e installation tool.
6.50 (165.1mm) 4.59 (116.5mm) 1.06 (26.9mm) 1.18 Ø (29.9mm) 2.25 (57.1mm) 6.17 (156.7mm) 4.74 (120.3mm) 4.88 Ø (129.3mm) 1.84 (46.7mm) 1.50 (38.1mm) 1.94 Ø (49.2mm) 1.36 Ø (34.5mm) table of contents description page warnings...............................................................................
3 caution keep nose assemblies clean and free of chips and debris. Warning installation of fasteners may exceed acceptable noise levels. Use approved hearing protection. Warning when operating installation equipment always wear approved eye protection. Do not look in front of nose assembly or rear o...
Description the gbp744e is a pneumatic-hydraulic tool designed specifically for the efficient installation of 1/4" cherrymax® & allmax rivets, as well as a wide range of blind rivets. It weighs just over 7 lbs. And can be operated in any position with one hand. It has a .580" rivet setting stroke an...
.48 1.06 filling and bleeding tool warning do not cycle tool without air bleeder, or the screw and stat-o-seal, installed in tool head. Severe personal injury may result. Caution before filling handle, air piston should be all the way down. To replace a small amount of oil in the tool, attach the ai...
14 13 12 16 23 15 2 18 19 52 20 21 22 32 31 29 30 29 28 27 26 25 24 33 34 34 36 34 33 37 38 37 39 40 41 42 51 47 46 45 44 43 1 4 5 7 9 8 10 11 3 6 53 54 8 o'ring in polsyseal must face in this direction 6 6/08.
Ref. No. Part num ber description qty. 1 744103 head cylinder assembly 1 2* 402482 button head socket screw 1 3* s572 stat-o-seal 1 4* 401088 back-up ring 1 5* a-260 o'ring 1 6* 744409 piston 1 7* a-1135 polyseal 1 8* 400792 o'ring 2 9* s892 o'ring 1 10 744414 cap 1 11 200232 deflector 1 12* s832 o'...
Overhaul the disassembly and re-assembly procedure can be accomplished by utilizing the following instructions and drawings. Use extreme care during disassembly and re-assembly not to mar or nick any smooth surface that comes in contact with seals. Before installing seals, always apply a good lubric...
Nose assembly fastener dia. Straight right angle offset cherrymax® 1/8 456max-701-17 1, 2 1, 2 456max-753a-54 1, 2 1, 2 456max-763a-43 1, 2 1, 2 allmax® 5/32 456max-744-20 11 456max-744-50os 1 1 huckmax® 3/16 456max-749-35 1, 2, 3 1, 2, 3 huck-clinch® mil-r-7885 1/4 08max-744-20 08max-744-50os nas93...
Gage bilt warranty seller warrants that all goods covered by this catalog will conform to applicable specifications and will replace, or repair, f.O.B. Our plant, any goods providing defective from faulty workmanship, or material, for 90 days from date of shipment. Said warranty to remain in effect ...
