- DL manuals
- Gaggenau
- Oven
- VG 411
- Operation, Maintenance And Installation Manual
Gaggenau VG 411 Operation, Maintenance And Installation Manual
Summary of VG 411
Page 1
Operation, maintenance and installation manual vg 411 gas cooker.
Page 3
1 vg 411 1. Important notes page 3-4 for your safety page 3 operating for the first time page 3 about use page 4 2. Features page 5 features of the appliance page 5 control knob page 5 burner parts page 5 3. Operating principle page 6 4. Operation page 7 5. Settings table page 8 6. Cookware recommen...
Page 4
2 congratulations on buying your new “vario” appliance. Before switching your appliance on for the first time, we would like you to familiarize yourself with your new appliance. In this manual you will find important notes on safety and operation. These will serve to ensure your personal safety and ...
Page 5
For your safety you must not operate the appliance if it is damaged. When connecting electrical appliances in the proxi- mity of the appliance, make sure that connecting leads do not come into contact with hot cooking surfaces! As the user, you yourself are responsible for maintenance and proper use...
Page 6
About use the appliance is intended solely for use in the household and must not be put to any other uses. Use the appliance to prepare meals only. It must not be used to heat up the room in which it is installed.! Use of a gas cooker generates heat and humidity in the room where it is installed. Th...
Page 7
Features of the appliance control knob burner parts 1 ventilation openings 2 large (wok) burner 5 kw 3 pot grid flame setting: 0 off high setting of outer and inner flame ring low setting of outer flame ring high setting of inner flame ring outer flame ring off high setting of inner flame ring outer...
Page 8
3. Operating principle 6 the appliance features one-hand operation, flame detection and automatic re-ignition. The ignition is activated when the control knob is turned. Should the flame go out during operation, the appliance will automatically re-ignite the burner. During a disturbance, the applian...
Page 9
7 switching on • place a suitable pot or a pan on the cooking position. • press down the control knob and turn it to the required position between the and symbols. The burner ignites automatically. • when using large pots or pans you should ignite the burner in the low position. • every time the gas...
Page 10
8 5. Settings table cooking cooking method examples level high boiling water searing meat heating fat, liquids boiling soup, sauce blanching vegetables roasting meat, fish, potatoes from browning flour, onions roasting almonds, breadcrumbs baking pancakes, egg dishes to boiling in open pot liquids s...
Page 11
Pots with a diameter of less than 160 mm or more than 320 mm should not be used. When using large pots, pay attention to keeping to a minimum distance of 50 mm between the cooking vessel and combustible surroundings. When buying pots, pay attention to the fact that the manufacturer frequently specif...
Page 12
The wok and accessories (not included in the scope of delivery) – the round-bottom wok is the ideal wok for your gas cooker. – the wok looks like a hollow semisphere with a long handle or wooden handle. It has a rounded base and slanted sides. The thin steel passes the heat swiftly to the inside, bu...
Page 13
11 keep the ventilation openings on the rear of the appliance clean. Do not block the ventilation openings. The burner (burner head cover and burner ring) will change the color during operation and become darker. This change in color will not influence the use-value. Please thoroughly clean the appl...
Page 14
12 part / material suggested cleaning procedure important reminders pot grid take pot grids off for cleaning. Do not clean in a dishwasher. (enamel on soak in sink. Soak burnt-in remainders in sink. Cast iron) clean with detergent and brush. Abrasive cleaners, used too vigorously or too often can ev...
Page 15
The appliance must be disconnected from the power and gas supply during all repair work. In the event of malfunctions, check whether the gas and electricity supplies are in proper working order. The cooktop cannot be used during a power failure. If the cooktop is being used when the power failure oc...
Page 16
14 10. Trouble shooting no electrical power switch the appliance on again. Should the appliance still not work, contact your gaggenau after-sales service. Burner does not ignite when switched on overheating protection wait, until the appliance has cooled and the signal goes off turn control knob to ...