Gaggia TS Operating Instructions Manual

Manual is about: Gaggia TS: Operating Instruction

Summary of TS

  • Page 1

    Istruzioni per l’uso operating instructions gebrauchsanweisung mode d’emploi instrucciones de uso modello ts.

  • Page 2: Iiiii

    Gentile cliente, la ringraziamo per la fiducia accordataci con l’acquisto di un nostro prodotto. Se lei avrà la costanza di seguire attentamente le indicazioni contenute nel presente manuale, siamo certi che potrà apprezzare nel tempo e con soddi- sfazione la qualità della nostra macchina. La preghi...

  • Page 3

    Prima della messa in funzione, leggere attentamente il manuale di istruzioni carefully read the following instruction booklet before starting up the machine. Lesen sie vor der inbetriebnahme aufmerksam die bedienungsanleitung. Avant la mise en service, lire attentivement le manuel d’instructions. An...

  • Page 4

    English 16 index 1 instructions booklet conservation and use ......................... 17 2 envisaged machine use ....................... 17 3 safety advice ........................................... 18 4 technical features .............................. 19 5 machine preparation ......................

  • Page 5

    17 english 1. Instructions booklet conservation and use the present instructions booklet has been prepared for the machine user, the owner and the installation technician and must be always available for reference purposes. The manual is destined for the user, the maintenance technician and machine ...

  • Page 6

    English 18 the user must not touch the machine if his hands or feet are wet or damp, neither must be use the machine in bare feet.Despite the earth system of the machine, the use of an automatic circuit breaker in compliance with the local regulations is recommended in order to avoid electric shocks...

  • Page 7

    19 english 4. Technical features fig.4.01 5 - machine preparation 1 tank lid 2 tank 3 power cable 4 electric outlet 5 main switch 6 level control plate fig.5.01 boiler capacity l 2.3 overall absorbed power w 1500 weight kg 15.

  • Page 8

    English 20 5.2 electric connection insert the power cable (3) into the machine and the plug into an appropriate outlet (fig.5.04). Before carrying out the connection make sure that the main switch (5) is on pos. O. Fig.5.02 fig.5.03 5.1 tank filling remove the lid (fig.5.02-pos.1) and fill the tank ...

  • Page 9

    21 english 6 - start up 1 tank lid 2 tank 3 power cable 4 electric outlet 5 main switch 6 level control plate 7 light for water lack level in tank 8 coffee switch (with distribution and boiler loading light) 9 boiler manometer 10 hot water tap 11 hot water pipe 12 vaporizer tap 13 vaporizer pipe 14 ...

  • Page 10

    English 22 fig.6.04 filters for coffee machine depending on the quantity of coffee ground, the appropriate filter must be as shown to avoid (fig.6.04) that, once the coffee has dripped out, the leftover powder remains attached to the nozzle. 20 mm 24,5 mm 24,5 mm 21 mm nf08/002/b 1 coffee cup of 5,5...

  • Page 11

    23 english 6.3 coffee preparation - select the correct filter and place it into the filter holder,use the small filters for one cup and the big filter for two cups (fig.6.04). Then place the filter holder into the machine and wait until it is heated. - when the machine has reached the required press...

  • Page 12

    English 24 fig.6.10 important: to avoid any clogging of nozzle, air intake and thickening of the external milk residuals, it is advisable to clean the steam nozzle just after the contact with milk. For an easier cleaning operation, the external part of the nozzle can be easily removed by pulling it ...

  • Page 13

    25 english 7 - maintenance and useful advice frequently check the filter holes (19) and remove any deposits. Should the water have been left in the ducts for a long time, it is necessary to allow some water to flow through them in order to remove any deposits. It is a good idea to rinse the filters ...

  • Page 14

    English 26 8 trouble shooting 9 machine dismantling to dismantle the machine we recommend that it is dismantled and the parts separated according to the type of materials involved (plastic, metal, etc). The parts separated in this way are then to be sent to the relative specialized disposal companie...

  • Page 15

    Gaggia s.P.A. 20087 robecco sul naviglio - mi - italia tel. +039 02 94 99 31 fax +039 02 94 70 888 internet: www.Gaggia.It e-mail: gaggia@gaggia.It cod . 4008022000 - rev . 03.