GAI-Tronics 723-905 User Manual

Pub.  42004-364C 

GAI-Tronics Corporation  400 E. Wyomissing Ave.  Mohnton, PA  19540  USA 

610-777-1374  

„  800-492-1212  „  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ®   C O R P O R A T I O N  

A   H U B B E L L   C O M P A N Y  

Model 723-905 

SmartSeries Remote Subset Amplifier 

Confidentiality Notice 

This manual is provided solely as an operation, installation, and maintenance guide and contains sensitive 

business and technical information that is confidential and proprietary to GAI-Tronics.  GAI-Tronics 

retains all intellectual property and other rights in or to the information contained herein, and such 

information may only be used in connection with the operation of your GAI-Tronics product or system.  

This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. 

General Information 

Product Overview 

The Model 723-905 SmartSeries Remote Subset Amplifier is an intelligent handset amplifier, speaker 

amplifier, and FSK modem intended for use in GAI-Tronics Page/Party

®

 and SmartSeries systems.  The 

amplifier is an integral part of GAI-Tronics desktop, desk-edge, and flush-mount stations.  It has been 

designed to be remotely mounted with the enclosure, allowing the associated subsets to be mounted on a 

desktop, on the edge of a desk, or flush mounted.  The amplifier is not designed for outdoor use and must 

be mounted at an indoor location. 

System Requirements and Limitations 

For proper operation, the Model 723-905 SmartSeries Remote Subset Amplifier must be installed in the 

Model 7245-005 Amplifier Enclosure with auxiliary inputs and used with one of the following subsets: 

Single Party Subsets: 

Multi-Party Subsets:

Model 726-101 Desktop Subset 

Model 7265-101 Desktop Subset (5-party) 

Model 711-102 Desk-Edge Subset 

Model 7115-102 Desk-Edge Subset (5-party) 

Model 716-102 Flush-Mount Subset 

Model 7165-102 Flush-Mount Subset (5-party) 

The SmartVolume

™ feature is not supported for Model 7265-101.  Also, the SmartVolume™ feature is 

not available for speakers equipped with L-Pads or for multiple speaker applications.  The Model 723-

905 Remote Amplifier is designed solely for use with the magnetic hookswitch subsets listed above.  

Subsets containing an RF hookswitch are not supported.