Galaxy Audio HOT SPOT User Manual - Using The Pa5X140 As A...
Using the PA5X140 as a...
Powered Monitor
When connected to a mixer’s monitor output or auxiliary output, the
PA5X140 enables each performer to create his/her own monitor mix.
Additional monitors can be attached to the PA5X140’s speaker output.
A recorder can be attached to the PA5X140’s LINE output.
Virtually any type of signal (instrument, mic level from a mixing
console, guitar, keyboard, tape player or condenser mic can be
plugged into the PA5X140 inputs.
Ultra-Compact PA System
The PA5X140 by itself is a one-piece PA system. Simply plug in a mic
or instrument for 100 watts of sound reinforcement power.
When two 16 ohm Galaxy Audio HOT SPOT personal monitors are
attached to the SPEAKER OUTPUT, the PA5X140’s power output
increases to 146 watts. Whether using the HOT SPOT or another
speaker, the PA5X140's power output depends on the impedance of
the speakers being powered. The load on the PA5X140's amplifier
section must greater than or equal to 4 ohms. Anything less will
overload the amplifier.
Practice Amp
A balanced signal from a microphone or second instrument may be
fed into one input while an instrument, CD player or tape deck is fed
into the other.
Page 8
POWERED HOT SPOT
FEATURES OF GALAXY AUDIO'S POWERED SPEAKER
·CUL Listed
·Black cast aluminum faceplate (used as an integral heat sink)
·Fire-retardant styrene plastic outer shell
·SmartALIC input circuitry automatically distinguishes between
microphone and line level signals without having to flip a switch.