Galileo Milano 3G Owner's Manual - page 42
43
MICRO GRAND DIGITAL PI ANO
Reverb Type Selection
- There are 10 reverb types available to choose
from. The selected reverb effect is applied to entire piano, not specially for
the instrument voice.
1. In the Setup mode press the UP or the DOWN buttons until the “R.Type“
appears on the LCD Display.
2. Press the ENTER button to confirm this, Its current setting will show and
blink.
3. Use the +, – buttons or the DATA WHEEL to select your desired reverb
type. The available reverb types are listed below:
Reverb Level Setting -
Adjust the level of reverb for the main voice.
1. Press the UP or the DOWN buttons until the “R.Level“ menu appears.
2. Press the ENTER button to confirm, Its current setting will show and blink.
3. Use the +, – buttons or the DATA WHEEL to change the reverb effect
level. The range is 0 - 127. Press the +, – buttons simultaneously to revert
back to the default setting.
R. Ty p e
R. L e v e l
Chorus Type Selection -
There are 8 Chorus types available to choose
from. The selected chorus effect is applied to entire piano, not specially
for the instrument voice.
1. In the Setup mode press the UP or the DOWN buttons until the “C.Type“
appears on the LCD Display.
2. Press the ENTER button to confirm this, Its current setting will show and
blink.
C. Ty p e
No.
Reverb Type
No.
Reverb Type
No.
Reverb Type
01
Small Hall
02
Large Hall
03 Plate reverb
04
Church
05
Cathedral
06
Gated Reverb
07
Echo
08
3/4 Echo
09
4/4 Echo
10
Triplet Echo
No.
1
2
3
4
Type
Duet
Close
Open
Octave
L r g . Ha l l
R. L e v e l
D. Ch o r u s
3. Use the +, – buttons or the DATA WHEEL to select harmony type. The
available harmony types are listed below: