Gallet ASP 120 Vernon Instruction Manual - V. Maintenance

EN

EN - 35

V. MAINTENANCE

Disconnect the appliance from the el. outlet. Store the vacuum cleaner at a dry place, far 

enough from heat sources (e.g. 

fireplace, stove, heating element) and protect it from 

weather conditions (e.g. 

rain, sunshine). Treat surface of the appliance with a soft and 

damp cloth, do not use coarse and aggressive detergents! Store the appliance properly 

cleaned at a dry, dust-free place out of reach of children and incapacitated people.

Floor nozzle, brush

After any vacuuming it is recommended to check visually the brushes or collectors for 

possible impurities. If there are some impurities, remove them.

VI. TROUBLESHOOTING

Problem

Cause

Solution

Motor won‘t start

Power supply not connected

Check the cord, plug and the socket

 button is not switched on

Push button 

Suction output is 

not sufficient

Open suction

Close the hole in the hose handle

Dust container full

mpty the container

Clogged micro-filters

Clean or replace the micro-filters 

Nozzle, suction hose or tube is 

clogged

Remove blocking objects

The cable 

cannot be 

wound in the 

entire length

Twisted cable

Straighten the cable

Take out about 50 cm of the cable 

and push again button 

VII. TECHNICAL  SPECIFICATIONS

•  Bagless vacuum cleaner

•  Power efficient ECO motor

•  High efficiency vacuuming

•  Quality HEPA filter (washable)

•  Dust container volume 1 l

•  Simple operation and easy maintenance

•  8 m radius

•  360° rotary wheel for easy rotation of vacuum cleaner

•  Softened wheels to protect hard floors

•  Automatic cable reel

•  Modern and elegant design

•  Accessories: universal floor nozzle with retractable brush, crevice nozzle, brush,  

upholstery nozzle, metal telescopic tube

•  Power supply: 230 V ~ 50 Hz