Gallet VEN41S Blizzard Instruction Manual - page 16

EN - 16

Once the fan has been completely assembled, you can now plug in to a mains socket. 

speeds control

Turn on the fan by pressing one of the four buttons on the fan base. 

First button switches the fan off. Description of buttons:

•  Speed III

•  Speed II

•  Speed I

•  OFF

Oscillation

For run the oscillatoin (rotate from side ti side) press the Oscilation knob P5 located on the top 

of the motor housing P6. To stop oscillation, pull the oscillation knob P5 out.

cLEANINg AND MAINTENANcE

•  Unplug the unit before cleaning or storing.

•  Wipe the unit with an absorbent tissue, paper towel or soft cloth. 

Never use an abrasive to clean the appliance. 

•  Do not immerse the appliance or the cord in water or any other liquid.

TrOUbLEsHOOTINg

The device is not working

•  Check that the mains connection cable is firmly plugged in.

•  Check the right function of outlet. Test outlet with other electrical appliances.

•  Check the supply cord to ensure no damaged is evident.

TEcHNIcAL  sPEcIfIcATIONs

-

Stand fan

-

Diameter  40 cm

-

3 speeds

-

Oscillate function

-

Adjustable height and vertical angle

-

Stable cross stand

-

Power supply: 230V ~ 50 Hz

-

Power drain: 50 W

-

Size:  64 x 128 x 64 cm

-

Weight (NETTO): 3 Kg

-

Noise level

We reserve the right to change technical specifications.