- DL manuals
- Gamewell FCI
- Gateway
- IF602
- Installation & Operation Manual
Gamewell FCI IF602 Installation & Operation Manual
Summary of IF602
Page 1
12 clintonville road, northford, ct 06472, 203-484-7161, fax 203-484-7118 www.Gamewell-fci.Com focalpoint™ system utilities user’s guide — focalpoint™ gateway installation & operation manual copyright © 2010 all rights reserved published in u.S.A. P/n: 52649 b3 ecn: 10-030
Page 2: Important Information
2 focalpoint™ gateway installation & operation manual - p/n: 52649 : rev: b3 2/11/10 important information this manual is designed for use by factory trained installers and operators of the gamewell/fci focalpoint™ system. All illustrations, functional descriptions, operating and installation proced...
Page 3
3 focalpoint™ gateway installation & operation manual - p/n: 52649 : rev: b3 2/11/10 wiring considerations a gamewell/fci fire alarm control panel contains power- limited circuits. You cannot connect external sources of power to these circuits without invalidating their approval. Verify that wiring ...
Page 4
4 focalpoint™ gateway installation & operation manual - p/n: 52649 : rev: b3 2/11/10 limitations of fire alarm systems gamewell/fci recommends that smoke and/or heat detectors be located throughout the protected premises following the recommendations of the current edition of the national fire prote...
Page 5: Table of Contents
5 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 table of contents section 1 fpt gateway overview ........................................................................................... 7 1.1: product description ....................................................
Page 6
Table of contents 6 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 section 4 fpt gateway operation ........................................................................................ 33 4.1: gamewell panel groups ...................................................
Page 7: 1.1 Product Description
7 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 section 1 fpt gateway overview 1.1 product description this focalpoint™ gateway (fpt gateway): • serves as a bridge between a focalpoint™ workstation and a gamewell/fci network. • translates gamewell/fci panel and dev...
Page 8
Fpt gateway overview product description 8 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 figure 1.2 advanced fpt gateway network - fci 90.23 effective october 1, 2005 1.1.1 about workstation ethernet network installations the focalpoint™ workstation is a proprietar...
Page 9: 1.2 Agency Listings
Agency listings fpt gateway overview 9 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 1.2 agency listings 1.2.1 compliance this product has been investigated to, and found to be in compliance with the following standards. National fire protection association • nfpa ...
Page 10
Fpt gateway overview agency listings 10 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 • can/ulc-s561-03 —installation and services for fire signal receiving centres and systems, first edition 1.2.3 retrofit applications the following products have not received ul 8...
Page 11: 1.3 Related Documentation
Related documentation fpt gateway overview 11 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 1.3 related documentation the following is a list of documentation resources related to a ul listed focalpoint™ system. • focalpoint™ workstation (52561) note: the contents ...
Page 12
Fpt gateway overview related documentation 12 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10
Page 13: 2.1 Required Equipment
13 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 section 2 fpt gateway installation 2.1 required equipment the fpt gateway requires the following: fpt gateway assembly (p/n: fpt-gate) the following are shipped with the fpt gateway: • focalpoint™ gateway pc board (p...
Page 14
Fpt gateway installation installation overview 14 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 • “cable connections” on page 18 . • “power connection” on page 21 . 2.2.1 gateway board layout figure 2.1 fpt gateway pc board layout reset button the reset button is u...
Page 15: 2.3 Cabinet Installation
Cabinet installation fpt gateway installation 15 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 2.3 cabinet installation mount the gateway cabinet on in inside wall per local requirements. Step 1. Use the provided door lock key to unlock the cabinet’s door. Step 2. ...
Page 16: 2.4 Hardware Installation
Fpt gateway installation hardware installation 16 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 2.4 hardware installation step 1. Install the pnet-1 between the gateway cabinet’s standoffs using the supplied hex nut (#4). Step 2. Ground the pnet-1 to the cabinet us...
Page 17
Hardware installation fpt gateway installation 17 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 figure 2.4 gateway parts mounting - 2.
Page 18: 2.5 Cable Connections
Fpt gateway installation cable connections 18 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 2.5 cable connections connect the gateway cables as follows: step 1. Cat5 cable from gateway pc board to pnet-1 surge suppressor. Step 2. Rj45 to rj45 standard ethernet netw...
Page 19
Cable connections fpt gateway installation 19 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 . Figure 2.5 gateway cable connections 2.5.1 600 series router serial data connection figure 2.6 600 series router serial cable connection 2.5.2 600 series panel serial data...
Page 20
Fpt gateway installation cable connections 20 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 figure 2.8 direct serial data connection using the gateway supplied cable 2.5.3 fci panel serial data connections figure 2.9 e3 serial cable connection figure 2.10 7100/7200...
Page 21: 2.6 Power Connection
Power connection fpt gateway installation 21 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 2.6 power connection the power requirements for a fpt gateway are +24vdc @ 330 ma nominal and battery backup in accordance with local code requirements. For canadian installa...
Page 22
Fpt gateway installation power connection 22 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 2.6.1 wiring restrictions *except for the serial connection to a 7100 panel. Rs232 • line impedence 5k ohm • max distance 50 feet ethernet • line impedence 100 ohm • max dist...
Page 23
23 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 section 3 fpt gateway configuration 3.1 default fpt gateway selection procedure the focalpoint gateway config tool, which is installed at the same time as the focalpoint™ workstation software application, is used to ...
Page 24
Fpt gateway configuration fpt gateway configuration procedure 24 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 3.2 fpt gateway configuration procedure 3.2.1 ip address setting step 1. Select the highest level entry in the nodes list column hierarchy. Figure 3.1 gat...
Page 25
Fpt gateway configuration procedure fpt gateway configuration 25 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 step 4. Change the default fpt gateway ip address so it will be added onto your ip network. The gateway default ip values are: • ip address: 192.168.1.2 •...
Page 26
Fpt gateway configuration fpt gateway configuration procedure 26 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 3.2.2 panel configuration settings step 1. Select panel configuration in the nodes list. The property/value fields display. Step 2. Select a panel in the ...
Page 27
Fpt gateway configuration procedure fpt gateway configuration 27 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 3.2.3 time settings the time settings consists of setting the sntp server address which dictates gmt (greenwich mean time) for your network and then setti...
Page 28
Fpt gateway configuration fpt gateway configuration procedure 28 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 time zone configuration step 6. Click on the time zone configuration entry in the nodes column. Figure 3.5 gateway time settings step 7. Click in the valu...
Page 29
Fpt gateway configuration procedure fpt gateway configuration 29 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 3.2.4 login password settings the first time the gateway is started the factory default password is used (44444444 - eight fours), after the initial confi...
Page 30
Fpt gateway configuration fpt gateway configuration procedure 30 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 3.2.5 ip address change using an alternate method when the gateway is connected to your ip network you may not be able to see the gateway from the gateway...
Page 31
Gateway and system communication configuration fpt gateway configuration 31 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 3.3 gateway and system communication configuration the focalpoint™ workstation software application is used to establish communication between ...
Page 32
Fpt gateway configuration gateway and system communication configuration 32 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 about adding a new network connection the admin user creates a network name and then adds a gateway. Network names and gateway connections are ...
Page 33: 4.1 Gamewell Panel Groups
33 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 section 4 fpt gateway operation fpt gateway operation is defined as a focalpoint™ system device reporting an event through the gateway to the workstation(s), and the workstation user’s task of handling of those event...
Page 34: 4.2 Event Handling
Fpt gateway operation event handling 34 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 4.2 event handling the focalpoint™ workstation uses the fpt gateway as the server in a client/server model. When the fpt gateway is installed, configured, and communicating with t...
Page 35: 4.3 Device Commands
Device commands fpt gateway operation 35 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 • when the gateway receives a silence event for the panel that is not on the network it will annunciate the panel is silenced on the workstation, even though the panel is not att...
Page 36
Fpt gateway operation about fci point id formats for off normal events 36 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 alarm = “al” fault test = “ft” outpt fail = “ou” very dirty = “vy” alert = “ar” fault = “fl” p.A.S. = “pa” verify = “vf” disconnect = “di” loop b...
Page 37
About auto-created points fpt gateway operation 37 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 the gamewell/fci 7200 has several types of cards that can be installed. The loop devices (detectors, modules, etc.) connect to the different cards. For example an alu a...
Page 38
Fpt gateway operation about auto-created points 38 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 by default a panel does not have any information programmed into dictionary item 2. For panel setup the panel’s programmer has to manually select one of the factory def...
Page 39: Information
39 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 section 5 focalpoint gateway config tool reference information 5.1 about the focalpoint gateway config tool the focalpoint gateway config tool interface is used to display configuration information about focalpoint n...
Page 40
Focalpoint gateway config tool reference information field descriptions 40 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 5.2.4 time zone configuration fields figure 5.4 time settings field descriptions gmt reference (greenwich mean time) gmt minute offset - is used...
Page 41: 5.3 Menu Descriptions
Menu descriptions focalpoint gateway config tool reference information 41 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10 5.2.5 panel properties fields refer to “panel configuration settings” on page 26 for procedural information. Figure 5.5 panel configuration prope...
Page 42
Focalpoint gateway config tool reference information menu descriptions 42 focalpoint™ gateway installation & operation manual - p/n: 52649:rev: b3 2/11/10
Page 43
Manufacturer warranties and limitation of liability manufacturer warranties. Subject to the limitations set forth herein, manufacturer warrants that the products manufactured by it in its northford, connecticut facility and sold by it to its authorized distributors shall be free, under normal use an...
Page 44
Gamewell-fci 12 clintonville road northford, ct 06472-1610 usa 203-484-7161 fax 203-484-7118 www.Gamewell-fci.Com.