Gamma 7900 Els Owner's Manual - Stringing  The  Frame

18

STRINGING  THE  FRAME

Clamping the First Main String

Secure the tensioned main string using the 

remaining fi xed clamp. Repeat the procedure 

for all of the remaining main strings and tie off 

at the appropriate holes following the racquet 

manufacturers specifi cations.

This will determine the starting point for the 

cross strings. If applicable, tie the fi rst cross 

string using an appropriate starting knot.

Weaving the Cross Strings

Weave the cross strings over and under 

the main strings being careful to alternate 

the weave of each consecutive cross string 

to be opposite of the previously installed 

cross string.

Completing the String Job

Once the fi nal cross string is tensioned 

and clamped, tie off at the appropriate hole 

specifi ed by the racquet manufacturer. Re-

move the frame from the Mounting System 

by loosening the Shoulder Supports and 

Frame Supports.