1. DL manuals
  2. Gamma
  3. Stringing Machines
  4. Progression 602 FC
  5. Owner's Manual

Gamma Progression 602 FC Owner's Manual

Other manuals for Progression 602 FC: Owner's Manual

Summary of Progression 602 FC

  • Page 1

    Owner's manual issue 7 - june 2014 602fc stringing machine.

  • Page 2

    2.

  • Page 3: Limited Warranty

    3 limited warranty gamma sports ("gamma") warrants to the original purchaser that the gamma progression stringing machine ("equipment") purchased is free from defects in materials and workmanship for a period of five (5) years from the date of original purchase for mechanical parts (excluding electr...

  • Page 4: Features

    4 features machine features drop weight tensioner with 9 to 90 lbs range and permanently engraved weight scale patented parallel jaw rotating ratchet gripper with diamond dust coated gripping surfaces professional six point “quick mount” racquet mounting system- accommodates all racquets professiona...

  • Page 5: Assembly Instructions

    5 assembly instructions engaging the drop weight bar stop the stringing machine is shipped with the drop weight bar in the horizontal position. To prevent racquet damage during stringing, the bar stop must be engaged. Remove the machine base from the shipping carton being careful to avoid lifting by...

  • Page 6: Mounting The Frame

    6 frame shoulder support arm adjustment being sure the shoulder supports are free to swivel in their mountings, simultaneously rotate the shoulder support adjustment knobs clockwise until both shoulder supports gently and squarely contact the frame. The shoulder supports are designed to rotate and c...

  • Page 7: Stringing The Frame

    7 fixed clamp operation the fixed clamps are of a dual action design. The string clamp and the clamp base operate independently of one another. To clamp a string, lift the clamp head and place the string between the jaws. Depress the clamp head lever to secure the string. The clamping pressure appli...

  • Page 8: Stringing The Frame

    8 gripping the string while holding the tension bar slightly above horizontal, wrap the free string clockwise around the gripper drum once and position between the gripper jaw. Gently turn the gripper clockwise while squeezing the jaws together until all slack in the string is removed. Note: for pro...

  • Page 9: Stringing The Frame

    9 stringing the frame warning: to avoid injury, keep fingers away from gripper jaws while tensioning string. Pulling tension while securely holding the string gripper drum with your hand, lift the tension bar above horizontal and gently lower the bar under its own weight. If the tension bar drops be...

  • Page 10: Stringing The Frame

    10 stringing the frame weaving the cross strings weave the cross strings over and under the main strings being careful to alternate the weave direction of each consecutive cross string so as to be opposite of the previously installed cross string. Once the final cross string is tensioned and clamped...

  • Page 11: Pathfinder Awl

    11 pathfinder awl once the awl is inserted, pull the handle of the awl outward while holding the tip section in place. This leaves the outer sheath in the grommet hole. Insert the end of the string into the outer sheath. While holding the string, slowly pull the sheath out of the grommet hole to lea...

  • Page 12

    12 adjusting the clamp pressure the clamps provided with your stringing ma- chine will need minor adjustments according to what string type, construction, and gauge you are using. To adjust the gap (clamping pressure) between the clamp jaws, insert the string through the racquet as if you were begin...

  • Page 13: Care & Cleaning

    13 care & cleaning with time and use, the clamping surfaces of your machine may become oily or dirty and result in string or clamp slippage while stringing. Periodic cleaning of the string clamps, string clamp base and string gripper is recommended. Knife sharpening stones work well for cleaning the...

  • Page 14: Parts List

    14 mbfs11 badm frame support mbmss11 badm mounting sys upg mbfc badm floating clamp mdcsc badm fixed clamp mpg starting clamp mpmc machine cover mps cleaning stone mpxfs floor stand sgsm stringer’s mat parts list 4a turntable bushing 5 rubber foot 6a cap screw- m8x25 8 bushing set screw 9 washer- m8...

  • Page 15: Parts Drawing

    15 sb sq t b parts drawing 5 mdcsc 13 14 mmspp13 381 133 21a 189 187 188 4a 8 9 6a 9 6a 190 284 144 356 140 357 141 146a 271 mqac11 10b mfspp11 mrsg 29 28 27 25 26 31 30a 83 30 162 163 161 35 34 262 mbmsp11 268 261 267.

  • Page 16: Gamma Sports

    Gamma sports 200 waterfront drive pittsburgh, pennsylvania 15222 phone : 800.333.0337 fax : 412.323.0317 visit our website at www.Gammasports.Com copyright 2014 gamma sports - all rights reserved mman-44 (mp62f-13).