- DL manuals
- Ganz
- DVR
- DR16NRT
- Instruction Manual
Ganz DR16NRT Instruction Manual
Summary of DR16NRT
Page 1
1.
Page 2
2 specification & organization specification & organization specification & organization specification & organization -------------------------------------------------- 11 specifications --------------------------------------------------------- 11 product contents list ------------------------------...
Page 3
3 configuration configuration configuration configuration - - - - record record record record --------------------------------- ----------------- 52 record mode --------------------------------------------------------- 52 no r ma l r ec o r d - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -...
Page 4
4 thank you for purchasing the ganz digimaster. This dvr is produced using the most advanced cbc technology and its quality is guaranteed by strict reliability and compatibility testing. This manual provides necessary information for the correct use of this product and also contains some useful tips...
Page 5
5 all copyrights of this manual are reserved by cbc co., ltd. Copyright © 2006 any reproduction or republishing of this manual for commercial purposes is prohibited. It is prohibited to transfer this manual via online media such as, but not limited to, the internet. It is also prohibited to post, di...
Page 6
6 the following are warnings and cautions to ensure user safety and prevent property damage. Please read the information below thoroughly..
Page 7
7.
Page 8
8.
Page 9
9.
Page 10
10 important safety instructions important safety instructions important safety instructions important safety instructions 1) read these instructions. 2) keep these instructions. 3) read all warnings. 4) follow all instructions. 5) do not use this apparatus near water. 6) clean only with a dry cloth...
Page 11
11 specification&origanization specification&origanization specification&origanization specification&origanization specifications specifications specifications specifications model dr8nrt,dr16nrt operation pentaplex pentaplex performance ( simultaneous live display/recording/playback/archiving/ netw...
Page 12
12 playback speed forward / reverse. 1x, 2x, 3x, 4x, 8x, 16x, 32x, 64x, 128x control front panel buttons and jog / shuttle /usb mouse search method calendar / timeline, event log, sequence, thumbnail, smart search split screen display modes 1,4,16 audio synchronization yes at any frame rate archivin...
Page 13
13 specification&origanization specification&origanization specification&origanization specification&origanization product conten product conten product conten product contents list ts list ts list ts list please check if all the product contents are present after opening the package. ① ① ① ① basic ...
Page 14
14 specification&origanization specification&origanization specification&origanization specification&origanization system organization system organization system organization system organization network camera alarm sensor relay out vcr vga monitor a/v monitor remote client pc image printer video in...
Page 15
15 product description product description product description product description front panel front panel front panel front panel ① power : system power on/off ② display : select screen division mode or rotation mode ③ sequence : select sequence screen mode ④ panic : trigger panic recording mode an...
Page 16
16 product description product description product description product description rear panel rear panel rear panel rear panel ① video in / loop : : : : bnc video input port, bnc video loop output ② monitor out : bnc monitor output svhs : output video by connected svhs. ③ spot #1 ~ #4 : 4 x bnc outp...
Page 17
17 remote controller remote controller remote controller remote controller ※ if there are several dvrs together, each dvr must be set with a different id. You can control all the dvr’s from one controller, by setting dvr id on controller using the id button. Power system on/off menu : open system se...
Page 18
18 hdd, dvd hdd, dvd hdd, dvd hdd, dvd- - - -rw connection rw connection rw connection rw connection above is the mainboard picture after opening the top cover. The connection board is in red box (1) is the port for system disk(master disk). Install the first hdd at this port. (hdd jumper location s...
Page 19
19 power on power on power on power on press the power button. The dvr startup screen detects and checks the hdd and dvd-rw. After startup process is completed, “logon” display appears for inputting the password. (default password is just leaving is as empty column. Next, click the “logon” button.) ...
Page 20
20 alarm detection channel show each channel. When the operator drags the mouse to the bottom left of the screen, this pop-up screen will appear. By pressing each button, the operator can turn (on/off) the functions of the above pop-up screens. Live display live display live display live display pre...
Page 21
21 ptz ptz ptz ptz • ptz controls appear like above. 1) select the camera. 2) control the camera direction. 3) press this button. The operator can control the ptz detailed configuration with pop-up screen. 4) control the zoom, focus, iris. 5) assign the preset. After moving the location, select the ...
Page 22
22 search search search search the operator can search the recorded data from normal, sequence, thumbnail or smart search folder. Normal search normal search normal search normal search select the “search” icon and press the “search” button. Logon display shows to input the password. (a) it shows th...
Page 23
23 input the snapshot tag. Select the channel. Select the screen. Input the memo. To save the image, click the [reserve] button. (the operator can check the saved image from backup data management of backup menu). Start burning: snapshot image can be burned with usb device or dvd-rw. E-mail: snapsho...
Page 24
24 backup data information would be shown in this screen. How to burn the backup and reserve is same with how to save the snapshot. (the operator can check the saved image from backup data management of backup menu). : click the button for full screen from (d). Then below screen would be shown. For ...
Page 25
25 : click the button for viewing the log from (d). Then below screen would be shown. Current log would appear. For returning, click the same button again. : click the button for changing the playback display from (d). The operator can select the playback display mode. The display color for the reco...
Page 26
26 • playback-> log click the “ log ” . Then it shows left screen. Select the date to see the log from calendar. Select the event section to see the what the operator desires. Select the log. For playing the recording data with log, double click the log. Click same button again to return to the orig...
Page 27
27 sequence search sequence search sequence search sequence search - the operator can search frame by frame. • select the channel. • select the date. • select the time. • the operator can select the time from timer or by dragging the timeline bar. • the method to search, is almost the same as normal...
Page 28
28 thumbnail search thumbnail search thumbnail search thumbnail search - the operator can search with divided screens in each time range. The operator can select the playback location by drag and drop timeline bar. • select the channel. • select the date. • how to search is almost same with normal s...
Page 29
29 smart search smart search smart search smart search - select the search method. (museum or motion) - museum search this search indicates or generates event (consistent/inconsistency) when search is compare with the starting image and also when the image continuous to occur more than designated ti...
Page 30
30 backup backup backup backup backup backup backup backup • select the “ backup ” icon and press the “ backup ” button. • logon display shows and input the password. It shows the backup display. • input the “ tag name ” and check if want to backup the “ log, text and rec index table ” information. ...
Page 31
31 backup data management backup data management backup data management backup data management • the operator can see the saved snapshot image and avi file form backup menu and search menu. : detailed information : delete : burning.
Page 32
32 configuration configuration configuration configuration - - - - system system system system camera camera camera camera - - - -> title > title > title > title • camera title: input the title and description with virtual keyboard. Click the right mouse button on the live display screen and click t...
Page 33
33 camera camera camera camera - - - -> color > color > color > color • camera color setup: select the brightness, contrast, tint and color. The operator can control the color of the live display by clicking the button. Camera camera camera camera - - - -> ptz > ptz > ptz > ptz • select the address,...
Page 34
34 camera camera camera camera - - - -> osd > osd > osd > osd • select the covert for each channel, main display osd, spot osd setup ※ ※ ※ ※ how to use the virtual keyboard how to use the virtual keyboard how to use the virtual keyboard how to use the virtual keyboard double click the left mouse but...
Page 35
35 alarm/event alarm/event alarm/event alarm/event - - - -> sensor > sensor > sensor > sensor select the activation, normal state (high/low-it is related with sensor type) and input the description. Alarm/event alarm/event alarm/event alarm/event - - - -> video loss > video loss > video loss > video...
Page 36
36 alarm/event alarm/event alarm/event alarm/event - - - -> motion detection > motion detection > motion detection > motion detection select the motion detection, activation, sensitivity (1~10) and motion area. The operator can select the motion area from above screen after clicking the button. Afte...
Page 37
37 alarm/event alarm/event alarm/event alarm/event - - - -> storage > storage > storage > storage • file system event - disk full: to check if the disk is full, turn on/off activation. • smart event - smart warning: to check the hdd trouble, turn on/off activation. - smart check period: select from ...
Page 38
38 select the activation of each channel. Setup the detail configuration after entering the “editer” by clicking the button or double click the selected channel. Select the sensor, motion, video loss, storage event and user defined event as user requires. After selecting it, action type can setup fr...
Page 39
39 alarm/event alarm/event alarm/event alarm/event - - - -> event action > event action > event action > event action - - - -> e > e > e > e- - - -mail notification mail notification mail notification mail notification - when a selected event occurs, an e-mail notification will be sent. - tick on/of...
Page 40
40 alarm/event alarm/event alarm/event alarm/event - - - -> event action > event action > event action > event action - - - -> video popup > video popup > video popup > video popup - when the selected event happens, the screen pop-up at the selected monitor. - after selecting the event (alarm, motio...
Page 41
41 display display display display - - - -> screen templ > screen templ > screen templ > screen template ate ate ate setup the display configuration. It is used when the operator wants to see live display with sequence mode. This menu should be setup before setting the main display sequence. The ope...
Page 42
42 display display display display - - - -> main display s > main display s > main display s > main display sequence equence equence equence • main display sequence: to start the sequence, the operator selects and makeup the working sequence type. - press the add button. - select the new list (it sh...
Page 43
43 display display display display - - - -> spot#1 > spot#1 > spot#1 > spot#1- - - -4 display sequence 4 display sequence 4 display sequence 4 display sequence in case of advance spot, setup method is almost the same with main display sequence. There is only one difference. The screen template could...
Page 44
44 audio audio audio audio • setup the audio configuration. - live audio: select the live audio channel. - network audio: select the audio transmitter and receiver. - buzzer: to press the key of front panel and remote controller. Turn the sound on/ off..
Page 45
45 user user user user - - - -> user group > user group > user group > user group default user group (administrator, manager, and user) cannot be deleted or edit. After selecting “add” button, the operator can make the new user group with new authority. Select “add” button, and “add group” screen wo...
Page 46
46 user user user user - - - -> user > user > user > user the operator can add, delete or edit the new user. Select the “add” button and “add user” screen would appear. After inputting the id, pw and e-mail with virtual keyboard, click “ok” button. : add : delete : edit.
Page 47
47 network network network network - - - -> configuration > configuration > configuration > configuration dhcp: in case of “ dynamic ip ” , select the “ dhcp ” click the “ apply ” button and the dvr gets the ip address automatically, after selecting the “ dhcp ” . To use the” static ip”, input the i...
Page 48
48 network network network network - - - -> e > e > e > e- - - -mail server mail server mail server mail server user account : enter a username to identify the dvr in email messages. Password : if security is set to on, enter the password here. Smtp server : the smtp outbound email server that shoul...
Page 49
49 system system system system - - - -> information > information > information > information information - site description: input the name by virtual keyboard - h/w version: dvr’s h/w version - s/w version: dvr ’ s fw version - mac address; dvr ’ s mac address controller connecting - setup to cont...
Page 50
50 s s s system ystem ystem ystem - - - -> update > update > update > update - firmware upgrade the operator can update the f/w by usb device or dvd. After saving the f/w in the usb and dvd, insert it to the dvr. Select the f/w upgrade button and the above “ firmware upgrade ” screen would be shown....
Page 51
51 storage storage storage storage - - - -> ope > ope > ope > operation ration ration ration - operation mode: select either overwrite/write once (no overwrite) - internal recording: it shows the internal hdd recording information which had been installed - dvd media: it shows the internal dvd-rw wh...
Page 52
52 configuration configuration configuration configuration - - - - record record record record record mode record mode record mode record mode click the right mouse button on the live display screen and click the configuration configuration configuration configuration menu and click “ record record ...
Page 53
53 - record mode in case “ normal record ” is selected from record mode, the operator cannot enter “ intensive record ” setup. Also, the operator cannot enter “normal record ” incase “intensive record” is selected. - weekly/daily the operator can select the “ weekly ” or “ daily ” record setup from ...
Page 54
54 normal record normal record normal record normal record parameter in case of recording setup, the operator should setup as 4 divided parts. The operator can setup max.Cif, 120fps each divided part. - select the resolution. - select the frame rate - select the quality. (low, standard, high, highes...
Page 55
55 schedule the operator can select recording type (timer, motion, alarm, user defined, alarm or motion and record off) each time, channel. Drag the desired section for selection and click the mouse right button. Then, recording option would appear. The operator can select the recording option for e...
Page 56
56 inten inten inten intensive record sive record sive record sive record in case of intensive record, record will be centralized at channel with events happening, as event priority. Parameter the setup is same with normal recording setup. It record as setup under normal condition. But when the even...
Page 57
57 schedule the operator can select the record on/ off each time and channel. Drag the desired section for selection and click the mouse right button. Then, recording option will appear. The operator can select the recording on/off each time and channel. - recording setup load, save and delete the o...
Page 58
58 panic panic panic panic record record record record the recording condition is changed according to the panic record setup when the panic button is pressed or detecting the panic alarm. In case of recording setup, the operator should setup as 4 divided parts. The default setup is cif, 30fps. Setu...
Page 59
59 sequence sequence sequence sequence • select the “sequence play” icon and press the “seq” button. Then, it shows sequence display which is installed. (sequence play/stop). It is related with “display -> main display sequence. Please setup the main display sequence firstly. Click the right mouse b...
Page 60
60 digital zoom digital zoom digital zoom digital zoom click button for returning to live display. Click the mouse right button for changing the channel. Then, it would show the channel list. Select the channel which is required to be changed. Location can be controlled by dragging the mouse and zoo...
Page 61
61 keylock keylock keylock keylock select the “keylock” by menu or press “lock” button from remote controller or front panel, then the system is locked. If any button is pressed under keylock condition, below would appeared. - input the password. Then, system is unlocked. Click the right mouse butto...
Page 62
62 panic panic panic panic press the “panic start,” it starts panic record. Please press the “panic stop” to stop the panic record. Click the right mouse button on the live display screen and click the “panic “panic “panic “panic start/stop”. Start/stop”. Start/stop”. Start/stop”..
Page 63
63 shutdown shutdown shutdown shutdown press the shutdown” and below would appear. Pressing “ok” after inputting the password and he system would be power off. Error code list error code list error code list error code list error code #015 : fail to reserve. Error code #026 : can't enter the ptz mod...
Page 64
64 remote sw installation remote sw installation remote sw installation remote sw installation system requirement system requirement system requirement system requirement ① main board (cpu): pentium-500(minimum), pentium 4 recommended ② os: higher than windows 2000,directx 7.0a ③ memory (ram): more ...
Page 65
65 introduction introduction introduction introduction ① main display : shows single or multi-channel view of cameras connected to the dvr. ② camera selection buttons : indicates camera #; click button to display a selected camera. ③ minimize / exit: minimize dvr client window (to taskbar) or exit r...
Page 66
66 remote sw local setup remote sw local setup remote sw local setup remote sw local setup local setup ① group & dvr list. ② dvr information. ③ camera assignment : setup camera. ④ check option (event-system, alarm, video, record & in/out) ⑤ add, modify, delete group. Add group add group add group ad...
Page 67
67 ③ input dvr information. (name, ip, port, id, pw) ④ set camera position, tick on/off option and press ‘ add ’ button. ⑤ new dvr list is shown on the left upper side. Configuration configuration configuration configuration ① video osd : select screen information. (title, name, date, time) ② video ...
Page 68
68 selection network id selection network id selection network id selection network id • select i/d to connect server. • i/d can be add, change or delete at setup. Tip tip tip tip ※ multi dvr client: 4ea dvrs can control the live view, search or backup data and setup each channel at the same time. S...
Page 69
69 avi file conversion avi file conversion avi file conversion avi file conversion • click avi conversion button to start avi file conversion. • a message would be shown during avi conversion, then click “ stop ” to save the avi file continuously. • ‘ press ‘ stop ’ to open designate file name & sav...
Page 70
70 remote sw search remote sw search remote sw search remote sw search search function introdu search function introdu search function introdu search function introduction ction ction ction ① search screen to play the selected video ② search bar: search & indicate camera recording situation by time ...
Page 71
71 search method search method search method search method ① indicates the time of day (0 ~ 24 hours) on search timeline. ② indicates recording mode (blue: no recording, red: recorded images present) ③ search bar: drag bar with the mouse to search through recorded video on the timeline. ④ indicates ...
Page 72
72 search option search option search option search option - - - - archive archive archive archive – backup image from server to remote pc. • time range - enter the starting and ending date/time. • channel : tick each channel to include in the archive. • include audio: tick on/off to include audio i...
Page 73
73 - - - - backup play (dvr player) backup play (dvr player) backup play (dvr player) backup play (dvr player) – –– – transfer to dvr player ① showing image (possible to only 1*1view mode). ② backup file open to play first video. Ex.: ch02_04131730_04131735.Rec ( backup file for # 2 ch. Apr.13, 17h3...
Page 74
74 - - - - save image save image save image save image – –– – capture image and save to local pc. • click ‘ save image ’ icon during playing video. • designate file name, file type (jpg, bmp), and location and press save. • conversion and save image from remote viewer. - - - - print image print imag...
Page 75
75 - - - - log viewer log viewer log viewer log viewer – –– – find video from the dvr event log. ① select starting date/time and ending date/time to search for event log events. - press search button to search and view search results. ② choose the dvr to search. ③ indicates the order in which events...
Page 76
76 - - - - event viewer event viewer event viewer event viewer - - - - show present event in server & find the image. ① indicates the order in which events occurred. ② indicates the dvr # on which an event occurred. ③ indicates the camera # on which an event occurred. ④ the date/time during which th...
Page 77
77 remote sw dvr system setup remote sw dvr system setup remote sw dvr system setup remote sw dvr system setup press button and it shows left screen. Select the system setup or record setup. Click the “system” icon. Input the password. (current default password is none.) so click the “ok” without in...
Page 78
78 camera camera camera camera title: input the name and description after selecting the channel with mouse. Color: select the brightness, contrast, tint, color of each channel. Ptz: select the address, protocol, baud rate of each channel. Covert/osd: select the convert, main display and spot osd se...
Page 79
79 alarm/event alarm/event alarm/event alarm/event sensor event: select the activation, active state (n/c, n/o-it is related with sensor type) and input the description. Video loss event: select the video loss activation. Motion detection event: select the motion detection activation, sensitivity (1...
Page 80
80 disk full: when disk is full, on/off activation. - user event select the user event activation click the “edit” then it shows above screen. The operator can make the user defined event with current event’s mixing. Two events could happen at the same time thus the operator could setup how it could...
Page 81
81 - event action * relay out - select the event to assign the action. - select the activation on/off. - active state: select the operation type (high / low) - dwell: select the type and action time. Transparent: it work from event ’ s starting time to event ending time. Latched: it work during sele...
Page 82
82 * buzzer - select buzzer on/off for selected event. . - after selecting the event (alarm, motion, video loss, user defined event) that want to buzzer, select the activation on/off. - select the buzzer type (latched, transparent) display display display display - screen template select the screen ...
Page 83
83 - main display setup - press the “ add ” button or select the current list. - select the name and dwell time. - select the new list. - select the screen template that requires to do the sequencing for each channel. - the operator can add max.16ea screen template by same method. - press the “ dele...
Page 84
84 audio audio audio audio - live audio select the live audio channel. - network audio select the audio transmitter and receiver user user user user - user group default user group (administrator, manager, user) can not be deleted. After selecting “add” button, the operator can make the new user gro...
Page 85
85 remote sw dvr record setup remote sw dvr record setup remote sw dvr record setup remote sw dvr record setup input the password. (current default password is none. So click the “ok” without inputting the password) record mode record mode record mode record mode - select the “ record mode ” and “ w...
Page 86
86 - weekly/daily the operator can select the ‘ weekly ” and “ daily ” record setup from ‘ normal record ” and ‘ intensive record ” setup. So the dvr will record as daily and weekly setup configuration of “normal and intensive record” setup mode. - pre-event recording time: when the dvr is not in co...
Page 87
87 normal record normal record normal record normal record - select the daily/weekly. - select the parameter/schedule - drag the time that requires being setup by mouse. Incase the setup is different for each time; the color would be indicated differently. - click the “set” button. Then it shows abo...
Page 88
88 it can setup each date. - schedule the operator can select recording type (timer, motion, alarm, user defined, alarm or motion and record off) each time, channel. Drag the section that requires to be selected and then click the mouse right button. Then recording option will appeared. The operator...
Page 89
89 in in in intensive record tensive record tensive record tensive record in case of intensive record, it will be centralized at channel which event is arising as event priority. - parameter drag the time that requires being setup by mouse. Incase the setup is different for each time; the color woul...
Page 90
90 - schedule the operator can select the record on/ off each time and channel. Drag the desired section for selection and click the mouse right button. Then, recording option will appear. The operator can select the recording on/off each time and channel. Panic record panic record panic record pani...
Page 91
91 web web web web client client client client installation installation installation installation web client connection web client connection web client connection web client connection input the ip address or url of the dvr in the internet explorer address bar. If when user use the ddns, input the...
Page 92
92 click the right button of mouse on the site in group and click the add group menu like below. Input the group name..
Page 93
93 click the grout name and input the dvr information. * input the default port and user id correctly. (6400, administrator with no password) then click the add button and ok button. Select the site name and click the connection button then input the password. (default : no password).
Page 94
94 if the dvr information is correct, can see the connected screen like below..
Page 95
95.
Page 96
96.
Page 97
97.